graresf

hi @dirtgoon Have you found anything? Looking for the same info

Thanks for the battery info. Not sure why I remembered it was a 8A battery, cause anything more than 13s2p would never fit in the...

Long term tests are not yet carried out. Power seems to be increased compared to original setup, but I think it´s not really doubled...

So you more or less doubled the power. Actually wondered if that would be sustainable. My stout has an 8 something amps battery and the...

@graresf: keep us posted! Interested if your bike will be revived! Back to the main topic: DIY Ampler Controller | Ampler Hack | Open...

Try this one if you need a switch which stays on/off Gebildet 2pcs 22mm... https://www.amazon.de/dp/B08HCKHLR5?ref=ppx_pop_mob_ap_share

Nice, thanks!

Does anyone has the schematics for the rgb button that turns on the bike? Or at least the name. I would like to reuse it (altough I...

b) "Full Edition" - only once tested if it would fit. Wiring Harness might be little too thick. Technically its working. - µC WEMOS D1...

Thanks a lot! Guess you bought the SBBRT-120L-1-8-708 as replacement (I bought SBBRT-120L1-5-20 as replacement) Originally there`s a...

In my setup supply voltage is only 3.3VDC and PAS works fine. Torque won't work with voltages lower than 7VDC. In your case I would...

Turns out my torque sensor is broken. No change in read voltage when pedalling. Will replace with a cadence sensor. Thanks for all the help.

Actually tried that last evening. Took the white and the black, and tried with the blue and then with brown one, but got nothing from...

Spectacular work! Myself have an Ampler Stout with a bad controller. But I chose the easier way, buying a generic KT controller and...