Kirill

I mean the maximum possible voltage for my cells. To use the maximum possible capacity. Since my cells are not perfect. The entire...

Voltage isn't relevant for what the balance wires can handle (they'll never see voltage high enough to exceed their insulation rating)...

Oh, sorry. Amps of course. So a regular thin balance wire goes to each cell. There is voltage of about 3V. The manufacturer supplies...

I don't really understand what you are saying. Current is not measured in V (volts), it's measured in A (amps). Assuming you just...

You don't need a separate balancer if your BMS already has one. The BMS balancer will eventually make all the cells the same full...

At the BMS is too little balance current(20 mV). Separate balancer up to 4V. It will be impossible to find replacements for the worst...

Thanks for the detailed answer. When on screen says balancing it is the BMS itself balances with a low current. I wasn't sure which...

A cell that has a higher internal resistance (and usually lower capacity) will have higher voltage drop during discharge, and more...