Recent content by KozmoK

I have a SEEV 800 fat tire scooter. Original Battery pack would die after driving a block. Opened it up, the pouches are a little swollen. The original SEEV 800 batteries are a whopping $550... if you can find a replacement (I am currently calling and emailing around) The Battery Pack is...

Motor: motenergy/mars 4201 Controller: Kelly KLS7222H,24V-72V,220A SineWave Controller Battery: 52v Samsung INR18650 25r 20ah 50a/80a max - Motor Sprocket 12t - Rear Sprocket 72t

I got rid of the 1000w motor and upgraded to a Kelly Sinewave controller. POWER!!!!!!!! Greate speed and torque on take off.

This is very interesting! I want to do this, so I dont have to charge individually and using the jst blance cables. now you say done use it on a bare pack, is there a device that will plug into the jst balance connectors and stop when its fully charged? like one of these...

Thanks nutspecial. I decided not to mix, and go with the two 6s 12000mah's. Ordered and done :) $120 is not a bad deal! Luckily I already had a lipo charger, although its only a 50w 6amp. The scooter I have is a E200 razor, I am cutting the frame midway and lengthening it 12" just for feet...

Thanks! I will go for two of the MultiStar High Capacity 6S 12000mAh Multi-Rotor and call it a day. They are $60 each.. pretty cheaper than the 10000mAh's weird.

Greetings! I am upgrading a razor e200 scooter - making it longer and upgrading to 48v 1000w motor and 1000w 48v controller. (min 41.5v max 60v - but was told to keep it under 55v) I want to use lipos's for the first time to gain some experience. (I have used Luna Lithium packs for my e...

Your way looks too complicated for me right now, it involves rewiring, making a harness (the batterys I would get would be the multistars with xt90's, and you can't split them in half), and combining the balance plugs. And with my luck a connection would get loose and start a fire. This is...

So you do not use the balancer plugs at all? How do you know if each cell is fully charged, and not over charged?

wesnewel, You came off pretty arrogant to my post. You have a high post count, so that means you probably know a lot more than I do in this subject. Did I rub you the wrong way or what? My post was meant to be from a beginner to a beginner in the same situation, looking at the same luna...

I am in a similar situation. I had converted two Baja MiniBike's to electric over the last 4 months. The first one I used Lead Acid (I was a cheap noob). The second one I used a Luna 48v pack $$$ shoulda went 52v. Now this last week I decided to upgrade the motor, controller, and battery to...

My Newest 48v 21ah lithium pack (lunacycle), 2000w sunwin controller - everything powder coated but fenders and gas tank

Thanks, its not a hub motor, but just a motor with shaft (goldenmotor BLDC-108) - so it might be easier to take a part. But I see the bigger the wire will help dissapate the heat from the smaller wire closest to the motor. I will try shortening the wire, it currently is 2ft long and I only...

Someone posted here in the 15 or so pages that its "Medium" speed is default with nothing jumpered. I am not sure if its correct, but when I shorted Black and Yellow, I could tell there was a little less speed. Black and Yellow = Slow Black and Blue = Fast Nothing = Medium

Greetings! Love this thread. I picked up a SunWin 48V 2000W 24Fets. I hooked it up to a GoldenMotor BLDC 1.5kw. I am running a 48v Lithium 21ah pack with BMS. Its fast as hell on a new Baja MiniBike Build I am doing. After just running it at a short period, the cable from the motor that...