Recent content by miki

Thank you so much for your reply. Indeed, here is concret information on this subject. It is a pity that there is no complete documentation. There are many unknowns in this controller, including problems with commonly encountered PAS sensors. It would be good to read the manufacturer's...

What are the name of the pads on the PCB of the KT 36V/48V 12A (25A) Sine controller, which allow you to quickly turn on the maximum speed limit to 25km/h?

Thank you very much, i.e. poor lighting on 20mA diodes or control of some MOSFET (I don't like relays). Such information should be available in the user's manual. But this controller dont have manual.

Ok thank you for this info. I prefer not to mix inside the new controller for now, I thought there was some catalog note, some manual, in which these data are officially given. But I see, nothing is officially given in China. Recently in the PAS wiring harness, the ground (Gnd) was led with a...

My driver KT36/48V 12A (max. 25A) Sinus has an output for lighting. This feature can be enabled on the KT-LCD3 display. I wonder what current can be taken from the controller so as not to burn the elements. How strong the lamp can I connect directly to these wires? I use a 48V battery.

What will this change? I have a bike with its wheels up. The chain is now removed. PAS is mounted. I can turn the pedals forwards and backwards. The sensor gives impulses to the output when turning forwards and backwards. Will reversing the sensor (I also have this screw) change anything?

Hello everyone, I'm new here. I have a KT36V/48V 12A controller (max. 25A) Sinusoidal and a small problem with the PAS sensor. The sensor sends pulses when the pedals are turned forward and backward. Although the PAS has directional arrows, it does not correctly detect the direction of the...