Recent content by outside

I'm very surprised because where you live, is the same latitude where I shot the movie! :lol:

Two Bafang K5 climbing on 2000m for 9km. Road with snow and Ice with tires with spikes. https://www.youtube.com/watch?v=l-i3ECOjnDM

hey guys, the max current is not my problem. On my bikes have 30Amps controller, but usually are limited to 6Amps. In fact 6Amps X 50V are 300W enough for my report like these: http://www.bellitaliainbici.it/prato_piazza.htm http://www.bellitaliainbici.it/val_fiscalina.htm if some time I have...

oh yes, what i wrote is from my friend that sell Bafang motor and have large experience with this connector. The second friend have a large experience in modellism, electric project and bricolage. Have you opened your female connector and checked if it is all ok? I think that depending how you...

Pin with 1.5mm diameter are 1.75 mm2 . The best rule is 10Amps max, but is for one cable. Now, male pin have 1.5mm and solid surface, but a female connector don't have this condition, They have a thin elastic layer that generate a contact and grip on male connector. Ok, if you generate 30Amps...

This is the original Controller Bafang sell with CST motor. Max Amps are 12 Amps. These Pins are not made for strong current, are only 1.5mm diameter. the major problem is for female connector, where contacts are very small!

Answer it's simple, I want use my old controller cabled on my old bike. In the same time I don't want ruin new controller and cable! I need pin function, for build a new cable. As you know, if I exchange pin 2 with 9, I risk hall sensor to burn out! Pin 8 I think is for speed,displayed on...

yes, I Have the original controller Bafang, but if you open it, you will found all cover with resin. You can't view nothing!. I need Pin function because I change controller and I must build new cable to connect motor.

Hi, I received a new Bafang CST motor, I need Pin function for this motor connector, if any one have it, thanks in advance!

my reports with Schwalbe Ice Spiker around Italy under snow: http://www.bellitaliainbici.it/passo_montecroce.htm http://www.bellitaliainbici.it/livigno_pano.htm http://www.bellitaliainbici.it/valfederia.htm http://www.bellitaliainbici.it/roncola_pertus_valcava.htm I must say that I am...

hi Gary, 237rpm at 36V means 6.58rpm x Volt. If you use 48V battery obtaining 316rpm. Naturally in case you don't have controller and battery and you must to buy it

Two k5 bafang in Toscana exploring Maremma. 500km and over 4,000 meter of climbing in one beatiful in Italy place. Two motors have running very good and my partner it was very satisfied for Alpina 00. http://www.webalice.it/c.designer/alpina_00.htm reports...

was scheduled for mid-April .... :(

Bike Fanatic @ Thanks ;-) no, these reports are made for my web site: http://www.bellitaliainbici.it where are 130 reports all made with my e-bike.

One year is past from the first test. In the last year I and my e-bike Alpina III we have climbing for over 25,000 meters. In this three months I have adding 6,000 meters of climbing. In the first two reports, I had two buddies with two Bafang, SWXH 250W and SWXK 220W. Last reports...