peadar

What do you use for crimp tool when cells are close together?

I'll explain some of the settings so you can tweak them later if you need, as I didn't have the time yesterday: Cell high protect : I...

So I used this extra piece of steel I had kicking around to make the bracket to mount the LR small block motor, it took like 2 hours...

Thanks for your quick reply. I sent off requests to Fardriver and the display maker to ask for details. Like you say, it's 50-50 on the...

It worked for me first time , noting changed but the app, will try controller setup you might be on to something, thanks

My controller came with Bluetooth I got it late 2022 have not finished project yet,used it when I first got it did Auto learn no...

I thought I saw something about Bluetooth that flashed up on screen for a second ,then vanished,my Bluetooth seems to be okay because it...

I ended up with kokam 57ah pouch cells new in the box 24 in series 96v ,should be better than the volt 88v

I will try to find a photo of the cells after solder, the product I used was this one:

what do you use for heatsink to protect cell?

8kw hub nd96850 don't know how to send link

My issue is with dissimilar metals, My cells are new in the box all the same and came with quality control datasheet, They are Kokam...

I build a couple of packs with aluminum bus bar then plastic aluminum plus bar then plastic. You'll find it in the A123 20ah thread by...

Was looking for something to connect series connection for pouch cells the link shows bussbar for such use, Aluminum to copper Any...

I bought some Kokam cells to build a 96v pack with;the search is over,