Recent content by Robbatz

P3 is on 1, so the throttle is always full power, and C1 is on 7, I've tried 6 and 5 with no effect. Two hours ago I moved the PAS sensor cable that was going in the controller box with the cable for the motor, and now the interruptions are a little bit less. Could be that is harvesting some...

Thank you for your answer. I will order one just in case it's the PAS sensor fault. But it has no logic to me. In fact, the PAS sensor is just a switch (correct me if I'm wrong), because if I crank the pedals, slow or fast the controller provides the same amount of power. And if it works in my...

Today I've been on a ride, about 40km. Riden in 2nd assist (170W), mostly flat road, no problems until last km to get home, it's a steep hill. At the bottom of the hill I've started in 4 gear assist, about (350W). And it started again to engage and disingage the power on the motor. I've tried...

Yes. I've tried 7,6 and 5. No change

I have a strange issue with the controller or the pas sensor. I crank the pedals on flat and medium uphill terrain, the bike rides normaly until a steep hill, then the assist starts to switch on and off. If I push the throttle no problem . . . The screen is LCD3. What could be the issue? The...