Recent content by Seya

Thanks, Well Im not running the same power through the MAc as the MXUS. I lowered the amps to 25 and watts to 1000 with the CA.. The motor spins smoothly with the wheel off the ground but as soon as It's under load it surges and has no power.

Hi guys , I have the same problem. Recently bought a Mac 12T ( slow wind from Paul. I'm using my 2014 Lyen 12 fet controller.. Controller worked very well with a big MXUS 3000 going all the way up to 6Kw. Now when I use it with my mac, it's a little jumpy but it works fine when the tireis...

Ok actually the post I want to remove a post in the " for sale " section because the item has been sold it. So there is really no way to delete my post ( There is a for sale post and 4 replies) ??

I know this might sound like a dumb question .. Or maybe the design is the thing that is dumb . How do I delete the post ?

Hey All, I'd be curious to hear from people who are using Adaptto with geared motors like Mac/BMC Particularly wanting to know if they run a lot smoother then with Infineon style controls? Gear motors can run a little rough using square wave controllers like infineon. Does the Addaptto...

I'll do a test with regards to the battery So i'll do a test with regards to the battery SOC. It really seems to do it across the board . I even tried changing the Regen voltage from 60 to 75 And it made no difference. Maybe I need to set the region voltage lower. My battery is 58.8 hot...

Hi, I have a ( Lyen ) Infineon 12 fet set to slip mode regen. It works well in that it does what it's supposed to by automatically regening when the throttle is disengaged. But it acts weird .. It's as if it's pulsing on and off randomly; it's not a steady feeling. As the throttle is...

Hey Guys, Just got my mxus 3000 up and running. I'm at about 5000 watts peak.. Instant smile! Wants to wheelie like crazy.. Im using a holmes 19" with a 2.25 veerubber from treatland. Under normal riding the controller/ motor get warm.. Which means on a big uphill I might have heat issues...

Hi guys, I just bought a MXUS 4T and a Lyen ( infineon style ) 12 fet controller. Does anyone know if the phase and hall sensors on the MXUS 3000 match with infineon style controller?

Yeah I know it was just a little wishful thinking because I'd like to use the gate belt drive which would require a splined set up

Off topic a little but can anyone tell me if this motor has a spline or a threaded free wheel?

I have been wondering for a few weeks now the differences in efficiency between using a geared hub motor or similarly powered single reduction mid motor ( not going through the detailer ) If using 1000 Watts.. And both the mid motor and hub geared motor have a 6:1 reduction.. How do they...

It's fine by me, no need for a different thread

Ahh ok I see where I was wrong. Removing 1 cell per parallel group is too difficult I supposed If I had a 24 V motor.. Can I remove the whole group ( creating 30 volt pack ) and limit the controller to 28 volts. I just want the setup to work for a protoype

I'm trying to lower the ah while keeping the voltage the same. In the image you can see there is a group sticking out making the battery a " p " shape and that affects my location choices. I want to locate the battery at the bottom of the triangle. I want to remove that 10s group making the...