Search results

Date Relevance Most replies

  1. Deutch420

    E-S Phasor Electric Bike Owners

    6000$ usd!!?? Congrats!!! I can't get 2/3 that price and I have better parts across the board. Congrats man.
  2. Deutch420

    Have anyone tried using 4S Lipo on a 12V trolling motor?

    Ive been eyeing up this one http://www.ebay.com/itm/271488313008?_trksid=p2060353.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT 24v, and only 136$ shipped. somethign like 500 of them sold, and if you check the history, no one is pissed. you can also look on youtube for the same motor, and everyone...
  3. Deutch420

    E-S Phasor Electric Bike Owners

    i got a quote from him a little over a year ago for the same thing. Its an "unadvertised" price, so i will PM you the deal he offered me, to give you a round about idea what he is asking for the swingarm. It did involve me sending back my old one along with $$. PM sent
  4. Deutch420

    12v trolling motor battery recommendations

    You can say that again!!! The motor only pulls 30 amps max speed. 15amps middle speed. And I went a few miles with it. Still yet to have a discharge under 12.5v Lol. But I did go with the massive 60lb 125ah battery. Once I go into the bay I know I'll be consuming more, but these fresh water...
  5. Deutch420

    12v trolling motor battery recommendations

    i think i have it figured out now. I charge at 10amps. charger drops from 10 amps to 1 amp once it hits 14v. after surface charge is removed, im left with a 12.75v charge. works great. last discharge was to 12.51. icharger at 10amps got it to 14v in 1 hour 29 minutes.
  6. Deutch420

    4s hardcase LiPo. how to remove a cell?

    Im loacted in Central NJ agreed. the 4S packs are 25$ each. there are no 3S packs cheaper than that. So your basically getting 9x 3S packs, for 75$ which is about 1/3rd new price. plus your getting 9 more cells free from the 6s batteries. so thats 36 cells. which could technically make 9x 4s...
  7. Deutch420

    4s hardcase LiPo. how to remove a cell?

    theyre 4S packs, not 6S. but if your asking if a GOOD 6S pack has the same bad cell readout via the balance tabs OR voltmeter, no it doesnt. Also, if your asking me if the cell readouts match, the answer is yes. I have an iCharger306, voltmeter and aCellLog 8M. they all corrilate and give the...
  8. Deutch420

    12v trolling motor battery recommendations

    better than 120ah for 95$?
  9. Deutch420

    12v trolling motor battery recommendations

    according to the replies ive recieved above, surface charge is the artificial volts shown at the battery terminals after charging. The volts will dissipate down after charge, eventually hitting the real, "rested" volts. You see higher volts at the terminals after charge b/c "In order to recharge...
  10. Deutch420

    12v trolling motor battery recommendations

    ..
  11. Deutch420

    4s hardcase LiPo. how to remove a cell?

    I have over 40 other lipo batteries between my other bikes. All cells are fine after hundreds of cycles. And has worked fine for 2+ years. Shit, I still have 6s batteries holding 4.1v charges and they're over 4 years old with 400+- cycles. They work fine. I have the same 4s hardcase packs in my...
  12. Deutch420

    12v trolling motor battery recommendations

    While I understand and comprehend what you said, I'm still confused. For example, I left my icharger on the 2.4v per cell option like the charger manufacture, battery manufacture and you suggested. However, I got concerned when it got near 13v (charger readout), so I stopped the charge early...
  13. Deutch420

    12v trolling motor battery recommendations

    Not to hijack my own thread, but is anyone familiar with charging a basic deep cycle marine Acid battery? I have a few questions regarding the charging. I called the battery manufacture and they say max charge is 12.7-12.9v and max amps during charge is 10amps. But then they say to charge at...
  14. Deutch420

    4s hardcase LiPo. how to remove a cell?

    Balance leads always. With a balance charge at the end, never rushed or removed from the charge prematurely. I charger 306 with a meanwell 1000. I too am suspicious of it always being the outside cell. But all the packs are the same, where I realised the balance charge was taking much too long...
  15. Deutch420

    4s hardcase LiPo. how to remove a cell?

    Thanks for all the replies guys! Seems like some of you have been answering others for me! perfect! :D The batteries dont have that many cycles on them, so i know the cells have some good life in them still. To those asking how i know they're bad. On a charge to 4.15, 3 cells hold 4.14-4.15...
  16. Deutch420

    12v trolling motor battery recommendations

    One year maybe. I'm not too sure why the 1 cell went bad in all of them. I assume something went bad in the harness or something. But these were for a 3rd bike for when people came over. Wasn't used much at all. Tried to store them @ 3.83 when I knew it wasn't going to be used for a while. It...
  17. Deutch420

    12v trolling motor battery recommendations

    i have 9x 4S hardcase packs, all with 1 bad cell. im yet to figure out a way to remove the bad cell from each pack. So while i have 27 good lipo cells out of 36, i need to figure out how to remove the 9 bad ones (1 from each pack) before i can use the good 27. I recently made a thread, maybe...
  18. Deutch420

    4s hardcase LiPo. how to remove a cell?

    I have about 9x 4s batteries, all with 3 perfect cells and 1 bad. Ide like to remove the bad cell from each pack, so i can use the remaining 3s packs for a trolling motor 12v battery pack for my canoe. How exactly do I go about this? I've opened the packs, and it seems like there are 2 circuit...
  19. Deutch420

    12v trolling motor battery recommendations

    From what i can gather, they are 7.6v 60ah @ 129 USD. So 2x in series would give me a 15.2v 60ah pack. and would cost me 260$. Aagain, im not sure if spending triple to save 20-30lbs is worth it in this scenario. but an interesting suggestion!! but a acid battery from walmart costs 1/4th that...
  20. Deutch420

    12v trolling motor battery recommendations

    I'm looking at getting a 30lb trolling motor. It runs at 12v and 20-30amps. I'm looking for suggestions on a battery setup. It seems everyone uses marine deep cycle batteries. But they weigh 40-60~ pounds and cost 80-200$. All the reviews on the cheaper ones are either 1 star or 5 star...
  21. Deutch420

    Have anyone tried using 4S Lipo on a 12V trolling motor?

    I too have a trolling motor running on a acid brick, and ide love to switch over to lipo. i have about 12x 4s hardcase packs, all with 1 bad cell. i was going to use the 36 good cells in a 3s setup for 12.6v 60ah. But if i can run 4s with the 36 cells, thats 16.8v 45ah. I would imagine the...
  22. Deutch420

    E-S Phasor Electric Bike Owners

    Wingsuit, im using a 5403 on a 135mm dropout. I have no room for anythign extra, especially no room for the wires out of the motor. The quick fix for me (other than spending 400$ for a new, larger 165mm swingarm), was something Rodney already suggested. C washers. I stacked 3 C washers, and i...
  23. Deutch420

    E-S Phasor Electric Bike Owners

    I agree with 9lives. Even though my fork hits the frame (as seen in the pics), it is never a concern while riding. even on very sharp turns on trails at high speeds i have no issues; and have never needed to turn harder than i currently can (except for making u turns). I put little rubber pads...
  24. Deutch420

    E-S Phasor Electric Bike Owners

    its a 5403 @ 100v80amps 20ah pack LiPo
  25. Deutch420

    E-S Phasor Electric Bike Owners

    So its been raining or snowing the past 6 days. i finally got out, but the ground was moist and cold and covered in leafs. As you could imagine, it was treacherous. But it was still fun. In the first vid, i am riding a fallen tree and jump off the tree onto a root covered in leafs. I landed...
Back
Top