Search results

Date Relevance Most replies

  1. richirich1113

    Crystalyte H3560 & H3580

    Thanks, The panels are screwed together closing tight on the frame. I would probably take it apart , but ive had so good luck with the bike right now. I have had no problems whatsoever, its been plug and play for almost 1000 miles. I can cay there is 3 - 7s= 25.9 10ah batteries inside. 2 of...
  2. richirich1113

    Crystalyte H3560 & H3580

    Ive done alot of modding since this thread. The bike is a KHS-104, upgaded brakes to 203mm hydro( on the rear the caliper has to be shaved and some modding so as not to hit the motor screws. tires=2.5 hookworms, DRbass torque plates. 12fet lyen w 2x shunt mod running 78v nom 88fully charged and...
  3. richirich1113

    Would be Lyen buyers... be warned * RESOLVED *

    They do when you pay alot extra on top of the controller to have the connections match so there wont be that kind of problem. I guess you didnt read my posts thoughly enough before posting
  4. richirich1113

    Would be Lyen buyers... be warned * RESOLVED *

    resolved
  5. richirich1113

    12 FET Lyen's Controller and Golden Motor Hub

    Dnmun, Okay its not me. I did start a tread about the problem i was having with the controller the first day i recieved it back on may 17. http://www.endless-sphere.com/forums/viewtopic.php?f=2&t=39852 I got recieved a coulple of replies, but nothing that solved anything. I had'nt said...
  6. richirich1113

    12 FET Lyen's Controller and Golden Motor Hub

    Dogman, i am also subscribed to this thread since i have also posted in this thread about the problem i was having with my controller. I do not know if this is a response from the other thread about lyen since i responded back to you in the other. Its a little early and i am a little confused...
  7. richirich1113

    How to program Lyen 18 fet?

    Im not to good at explaining over text but, Once you have the programing screen up , at the top you will see the open tab. click on that and you should be able to get to and open the profile he has sent and that should fill in the boxes. The Rshunt value should be 1.000 if it is a stock lyen...
  8. richirich1113

    Would be Lyen buyers... be warned * RESOLVED *

    resolved
  9. richirich1113

    Would be Lyen buyers... be warned * RESOLVED *

    Resolved
  10. richirich1113

    Would be Lyen buyers... be warned * RESOLVED *

    resolved
  11. richirich1113

    Help wiring lyen 18 fet controller

    Just get an on/off switch from radio shack or local auto parts and solder in line with the thin red wire. Better to have an on/off switch.
  12. richirich1113

    Would be Lyen buyers... be warned * RESOLVED *

    resolved
  13. richirich1113

    problem with keywin controller still

    Yes, click the start transmit on the computer then hold the button on the cable till you see the bars flash on the transmit gauge. it could take up to 5 sec. or so.
  14. richirich1113

    What is the real name for the Xlyte hall connectors?

    Lyen, carries that type of connector, Also ebikessf sells them. it is called the mini xlr. I guess its just an ebike version. IDK I like them, i use them for my throttle , 3 speed switch and halls. They fit better in a small wire harness. Woops , i just seen your in the UK so i dont know...
  15. richirich1113

    problem with keywin controller still

    Since reading your post the only thing i can think of , and you had not mentioned. When you start to transmit on the computer are you pushing the little button on the program cable? My usb cable has one that is close to the controller connection that must be push and held for about 3 sec. to...
  16. richirich1113

    12 FET Lyen's Controller and Golden Motor Hub

    I just recieved an email from him today, only bad thing is he said he is overloaded with work but will try to figure the problem as soon as he can. Since it is a load problem , just bench testing is not going to work. I think he is going to have to put it on a bike to see the problem. I will...
  17. richirich1113

    12 FET Lyen's Controller and Golden Motor Hub

    Nope, that would be good maybe for a sensored controller. I think the OP's controller is sensored but i do not think this is the problem. Mine is sensorless and the 3 foward phase combos all performed the same. Everything possible that is external has been tried. Waiting now for Lyen to find...
  18. richirich1113

    12 FET Lyen's Controller and Golden Motor Hub

    Sorry , already tried that. 3 speed switch acts acordingly. Also, any setting under 100% would still accelerate rapidly to the set speed. The problem has to be inside the controller itself. Every program /setting was tried. Lowering the amps to 20 then raising up to 45 made absolutly no...
  19. richirich1113

    12 FET Lyen's Controller and Golden Motor Hub

    Lyen supplied the shunt value for the controller to match the CA. He also knows what motor and battery voltage i am using. He also supplied the program to match all the values that i wanted. Lyen had also sent ne program parameteres to try and nothing works. I have tried everthing he has...
  20. richirich1113

    12 FET Lyen's Controller and Golden Motor Hub

    It is a problem with the controller, its kinda wierd that you are having the same exact problem.I was thinking i was crazy having this problem. He said he tested mine too. The thing is if you try the controller with the wheel off the ground , it starts fine and the no load speed is correct but...
  21. richirich1113

    12 FET Lyen's Controller and Golden Motor Hub

    So i am not the only one that has the same problem with Lyens 12fet controller. I have recently purchased a 12fet sensorless, i have a crystalyte controller that works fine but i dont like the APM so so i also bought a CA. When i hooked it up same thing -it would only go 10mph less than normal...
  22. richirich1113

    Rshunt value for crystalyte 72v 45amp sensorless controller?

    Does anyone have or know what the Rshunt value be for a crystalyte 72v 45 amp sensorless controller. I have a new CA and it needs programing. Thanks
  23. richirich1113

    Hub Motor Spinning At 60 Volts Video

    edit
  24. richirich1113

    Is this a deal or what ......

    The guys at HPC had a good laugh when i called them and sent them the link to the site. If it wasnt a scam why would the seller on Ali have to cut and paste someone elses product?
  25. richirich1113

    unloaded amp draw on a sensorless controller?

    Its a crystalyte 3540 motor, I am just wondering how it could have an 10amp draw unloaded with a sensorless motor? Anybody got any idea?
Back
Top