rylie
1 mW
Hopefully people who have a Lyen controller connected to a Golden Motor hub can chime in here.
Current setup...
All Golden Motor products, 48V 10ah battery, Pro 901 Hub and External Controller. Everything functions fine, I get 45ish (kph) on flat ground. I decided to get a Lyen controller to help with acceleration, hills and head wind. Just an all round better controller... or so I though.
Here's the problem...
Hookup the Lyen controller and get around 30ish (kph) on flat ground and wussy acceleration and torque. Tried multiple hall and phase configurations, some don't work and the ones that do get the previously mentioned. Also tried disconnecting CA to make sure it wasn't interfering.
Multiple emails back and forth with Lyen, but still drawing blanks. So I am looking to the ES community for help.
Current setup...
All Golden Motor products, 48V 10ah battery, Pro 901 Hub and External Controller. Everything functions fine, I get 45ish (kph) on flat ground. I decided to get a Lyen controller to help with acceleration, hills and head wind. Just an all round better controller... or so I though.
Here's the problem...
Hookup the Lyen controller and get around 30ish (kph) on flat ground and wussy acceleration and torque. Tried multiple hall and phase configurations, some don't work and the ones that do get the previously mentioned. Also tried disconnecting CA to make sure it wasn't interfering.
Multiple emails back and forth with Lyen, but still drawing blanks. So I am looking to the ES community for help.