Search results

Date Relevance Most replies

  1. D

    Touring Hub Motor and Battery Choices

    I would guess the trailer has about 50 lbs ( capacity is 32kg or 70 lbs) on it right now. (tent, sleeping gear, clothes etc). I am still working on being able to make coffee in the morning, which may add some weight. This is a bit a test trip as I have cycled with gear many times before, just...
  2. D

    Touring Hub Motor and Battery Choices

    Ian, I am currently on a bit of a tour. I am heading Durham, NC to Ocracoke Island and the Outer Banks north to Manteo NC. All told I will have logged 700 or so miles once I return to Durham. I have a 250 watt front motor and a 36v15A LiMn battery. I did consider a 2nd battery as i have a...
  3. D

    new build using a Schwinn Tailwind front geared hub

    D8veh, Good call, and I agree. I actually have the battery strapped down through holes in the trunk bag, so it really does not move at all. The weigh is not too bad ( a little high and too far back but not dangerous feeling) but I can see how having it closer to the center would help. Today I...
  4. D

    new build using a Schwinn Tailwind front geared hub

    Here's a couple of pics if anyone is interested. I have put over 30 miles a day on for the past 2 weeks and it has been a blast. The finished bike http://imgur.com/BRDaGBt The wires going up the seat post into the trunk bag http://imgur.com/W6escNV and the controller / battery in trunk bag...
  5. D

    Galaxy Note 2 Ebike handlebar Mount

    Ouch! hope you had insurance ? Is it just the screen ? not a recommendation but there are replacements available http://www.aliexpress.com/products/galaxy-note-replacement-screen.html I tried using my phone the last couple of days but GPS runs the battery down fast. I ordered a Sigma BC 506 to...
  6. D

    new build using a Schwinn Tailwind front geared hub

    DewJunkie, cool! I am on my 3rd day (25 miles round trip) and I plan on riding everyday if possible. I am actually moving from a scooter to the e-bike. Thanks for all your help! Top speed today was 32mph and average moving speed was 18.0!
  7. D

    Bargain wheel set with nexus 8 speed & hub motor

    MD, thanks for the help. it's all wired up and running well. :-)
  8. D

    new build using a Schwinn Tailwind front geared hub

    d8veh, thanks for all your help. I just got back from a 18 mile ride, it's all good. sorry for the bother.
  9. D

    BMSBattery/ECityPower Experience

    The order I placed recently for a battery/controller went well. They updated the order as it progressed and once it hit DHL I had access to real-time data regarding the delivery. Everything arrived as expected and took about 2 weeks.
  10. D

    Report on SPEZI 2011.

    somewhat relevant velomobile! http://www.organictransit.com/ they are building these in my city. they have 48v motors and can carry 250 lbs.!
  11. D

    Bargain wheel set with nexus 8 speed & hub motor

    MD, thanks for the reply/update. Yes, the small black connector on the hub is one I was trying to match for clean look but solder sounds like a simple solid way to go. I haven't soldered in a while but I think i could manage. Do you recall the gauge of the small HS wires ? they look 24 or...
  12. D

    new build using a Schwinn Tailwind front geared hub

    I think the HS connector on the hub matches this connector http://www.electricrider.com/crystalyte/x-plug5m.htm, if I get this connector http://www.electricrider.com/crystalyte/x-plug5f.htm and it doesn't match, no worries I should be able to replace the connector on the hub with the one above...
  13. D

    new build using a Schwinn Tailwind front geared hub

    D8veh, So for the battery power to controller power, I just need to change the molex style connector on the controller to Anderson connectors which were provided, I think I will need a Tricrimp to do this properly. Does the 9-pin cable on the link you provide phase (3 wires) and hall sensor (5...
  14. D

    Bargain wheel set with nexus 8 speed & hub motor

    MD, did you ever get the hall sensors hooked up ? I have the KU65 and it appears the motor/controller will not run w/o the hall sensors connected. I am still trying to figure out what type of connector is on hub for the hall sensors. Also what cable did you run from the controllers 3 phase...
  15. D

    new build using a Schwinn Tailwind front geared hub

    D8veh, I don't mind changing the connectors to match but other than the Anderson connectors (crimper $40 plus connectors) I still don't know what I need for the hall sensor connector or the other cables. it looks like either a d-sub 5 pin or something else (another crimper @ $30 plus...
  16. D

    new build using a Schwinn Tailwind front geared hub

    Ok, so some progress. If I mount the controller in a frame bag I need a cable(s) 12-18 inches long to connect the 3 phase wires and the hall sensors wires from controller to the hub. according to the KU65 wiring diagram the 6P connector has 5 wires as does the front hub connector (not sure what...
  17. D

    new build using a Schwinn Tailwind front geared hub

    hmm, Well i did learn the connectors on the battery are 'Anderson' connectors http://www.andersonpower.com and the wiki page is helpful. http://www.endless-sphere.com/w/index.php/Main_Page My goal was just to test the motor/controller/battery today but I have barely thought about how to turn...
  18. D

    new build using a Schwinn Tailwind front geared hub

    dmtcov, Well, i just got everything this morning. There are both pro and negative threads regarding BMSbattery. As far as my order (via PayPal) went, they updated their website as the order moved along and once it hit DHL I received a tracking number and I actually knew it would arrive this...
  19. D

    new build using a Schwinn Tailwind front geared hub

    Haha, thanks! I did have it in the cart after all but I left PAS out. Its all good - order placed - $122 shipping via DHL - nothing left to do but smile smile smile ! :-)
  20. D

    Bargain wheel set with nexus 8 speed & hub motor

    Fabio, 1000w is spot on, the hub is complete as described! the brake and shifter cables were snipped when removed on mine. looks like they are gone ... 282012 Discontinued great thread 1000w!
  21. D

    new build using a Schwinn Tailwind front geared hub

    D8veh, thanks again. I think I have a better understanding now. I am going to with your 1st suggestion of the 36v15Ah battery . bag and rear rack. I did read through your builds on pedelec and it was very helpful in understanding the various layouts and bike styles! I have to say I don't really...
  22. D

    new build using a Schwinn Tailwind front geared hub

    D8veh, Thanks for the link to the rack and your build. That is one hideous bike rack, lol. One of the main goals of this project is a bike that is still light with pedal assist and a bit of throttle. I am still mulling through the battery choices (weight vs cycles vs Ah vs everything else) but...
  23. D

    new build using a Schwinn Tailwind front geared hub

    I think I made some progress ... at least as far as basic wiring understanding....lol The hub has a part number of bf904dD10534, this thread explains the bafang SWXH6 wiring and link to a wiring jpeg that matches my hub. http://www.endless-sphere.com/forums/viewtopic.php?f=2&t=8928...
  24. D

    Bargain wheel set with nexus 8 speed & hub motor

    Ykick, I created a new build thread per your advice and asked the mods to delete my post. Is it okay to ask how the wiring was done on this build or just stay in my thread ? deadmul3
  25. D

    new build using a Schwinn Tailwind front geared hub

    Hi!, I have been reading and researching E-bikes for the last few months. At 1st I was considering a ready-to-go bike but I have a quality Scott SUB 35 that should work fine! So, I bought a wheel set with the front hub via this thread http://endless-sphere.com/forums/viewtopic.php?f=3&t=48460...
Back
Top