Search results

Date Relevance Most replies

  1. A

    S06S Controller bypass of LCD for Pedal Assist to work

    I think it will work, BUT I would recommend getting the LCD so you can change settings to limit the watts to the motor and set the correct P value (I guess 160 is it according to D8veh). I believe that NOT doing those 2 things contributed to me stripping the gears in the same motor.
  2. A

    basic question- q 75

    Yes. See what I said, and what the smarter people said here: https://endless-sphere.com/forums/viewtopic.php?f=2&t=84101 I am really intrested in your mid drive set up and how it turns out. I was considering something similar, I was just going to put the smallest chainring I could onto the...
  3. A

    Help! Stripped gears in a Cute Q75

    Ok, I realize my words are really confusing. Here are some pictures. It was a pain getting the holes to align right. I just wiggled the drill around to make it wider if I didnt get it right. I guess you could lay some paper on there and punch holes in it as template, I didnt think of it at...
  4. A

    Help! Stripped gears in a Cute Q75

    Yes that side does unscrew. You take the screws out of it (the connect the shell to the freewheel inside). I drilled 3 holes to match the same patter in a piece of wood, with a large hole in the center for the axle. Then I put 3 bolts of the same thread through the holes I made into the body...
  5. A

    Help! Stripped gears in a Cute Q75

    Yes indeed but that being said: When I contacted them at the first time (the sales person I bought the kit from at first) I was clear that I would order more stuff if they could help with the parts, and I got no response what so ever to that one. When I sent the email which finally got me the...
  6. A

    Help! Stripped gears in a Cute Q75

    Well the shipping was $68 USD, no transaction fee. But that was for a motor and several sundry items little hidden wire brake sensors, PAS sensor, throttle AND the gears, all told $184 of other stuff. The motor itself is fairly dense after all.
  7. A

    Help! Stripped gears in a Cute Q75

    Yeah $20 per set, pretty expensive actually considering a new motor is less than $100, but I consider it a reasonable fee for tracking down something that is apparently a weird part.
  8. A

    Help! Stripped gears in a Cute Q75

    At long last I got my gears. I emailed the Aekema folks, one response, then nothing. Emailed the original sales person at BMS battery who sold me the stuff. No response. I would much prefer to hear NO than to feel ignored, though I must give every one who responded even once credit for being...
  9. A

    Electrifying roadbike - q75

    I did finally get gears from BMS battery, $20 USD plus shipping per set. The fit fine. I was difficult getting anyone to respond, then when I finally did it took about 2 months. Details on the post about that.
  10. A

    Help! Stripped gears in a Cute Q75

    Ok so maybe persistence paid off. Aikema never emailed me back after the initial one I mentioned. The person at BMS battery I bought the stuff through never emailed me back either. I emailed the general BMS batter contact and got a response from a different sales person. The looked into it...
  11. A

    Help! Stripped gears in a Cute Q75

    Need some advice, I emailed Aikema with a brief text and the picture with measurements attached below, they emailed back next time the sun was up in their time zone. I was really suprised impressed by the quick turn around. The message was brief: "Dear Eric, Where do you come from?Where you...
  12. A

    Help! Stripped gears in a Cute Q75

    I emailed Aikema. Will post what I hear.
  13. A

    Help! Stripped gears in a Cute Q75

    Ykick, how did you find that website? I searched for the Cute and Tongxin Cute a ton and never found anything.
  14. A

    Help! Stripped gears in a Cute Q75

    Thanks so much for the Aikema info! Although it would be best not to make to many inferences from email with a language barrier as well but when I emails BMS battery asking for gears it seemed like the attitude was "We don't make money selling cheap gears." I haven't even emailed them because...
  15. A

    Help! Stripped gears in a Cute Q75

    Bascially I changed my P1 to 160, and I went to test the thing out. I mistakenly believed that with the p1 @ 160, the controller motor mismatch (motor rated to 200 W, cotroller rate to 250w) was not on issue. In order to test and see if the P1 was corrected I applied full throttle to the wheel...
  16. A

    Help! Stripped gears in a Cute Q75

    How can I find replacement gears for a cute Q75? The gear is helical on the bottom with straight gears on top. There is an insert or bearing inside of it. I stripped the top portion. (It is not very obvious from the pictures) I asked the supplier BMS Battery when I ordered the motor if they...
  17. A

    S06S Controller bypass of LCD for Pedal Assist to work

    ok I saw in https://endless-sphere.com/forums/viewtopic.php?f=2&t=81852&p=1206240&hilit=p1+setting+q75#p1206240 you say P1 of 160. Is this still what you use?
  18. A

    S06S Controller bypass of LCD for Pedal Assist to work

    How do I found out what P1 should be? Agreed, you definately need the LCD plugged in to set everything up.
  19. A

    S06S Controller bypass of LCD for Pedal Assist to work

    Hello, I accidentally figured something out. Perhaps it is obvious to others and everyone else on here knows this already, but I want to share in case there is another noob out there this it may help. I have a Cute q75 with a S06S and like using it on pedal assist (PAS). I had the LCD screen...
  20. A

    Reversing a Cute geared hub motor (BLDC)?

    Sorry for long period of inactivity, been busy. So I believe these are the thrust bearings you are referring too: And here is the other end: It looks like no thrust bearings so it sounds like reversing it is a bad idea. Agreed? On a side note, does any one know where to get replacement...
  21. A

    Reversing a Cute geared hub motor (BLDC)?

    Hi, I am interested in reversing a cute Q75 hub motor, interested in putting a sprocket on it and making a mid drive and the motor has screw mounts on the wrong side that I could use to attach said sprocket, but I need to get it flipped over. I want to mount a LEFT side chainring or free wheel...
  22. A

    Overheating vigilence

    Hello, I am starting out with a Q75 hub motor road bike, riding it for about 1 month now. The tempurature next week is predicted to be >100F, (38C) next week. My commute ride is mostly a long steady climb up a mild to moderate slope My ride so face the motor and controller have been warm...
  23. A

    Drop bar controls set up

    Ok cool, I get what you are saying Raged. That is beyond my electrical sophistication but I am sure I would learn a lot figuring it out. (or I could ask my engineer brother how to do it, struggle to understand what he is talking about, ask too many questions to the point he will build it so I...
  24. A

    Q75 Road bike results - Objective as well as subjective;

    Ok, so you mean, take them out of the plastic and press them into the chain ring screws. I like it. Do you have problems removing them to get the Screws out?
  25. A

    100W Mid Drive? - Am I an idiot and other questions

    I ultimately went with a Q75. Description of results here, if anyone is interested: https://endless-sphere.com/forums/viewtopic.php?f=3&t=81087
Back
Top