Search results

Date Relevance Most replies

  1. H

    kWeld - "Next level" DIY battery spot welder

    Hello guys. Upgrading the cable from 8 awg to 6 awg, what length should i set the kweld on setting? The totalt length is 1.5m.but the kweld is programed as 8 awg I assume.?
  2. H

    kWeld - "Next level" DIY battery spot welder

    So after disassembling the packs, and making it to 3s3p, I weirdly still get 1800amp? What could be the reason? Could it be that I soldered the lugs for 4 awg, that may make it read wrong?
  3. H

    kWeld - "Next level" DIY battery spot welder

    Thank you very much the help! :)
  4. H

    kWeld - "Next level" DIY battery spot welder

    Have a question regarding calibration. I use 3s4p spim08hp. The cable I use from the battery to kweld is 4 awg wire, length of 300mm, so in cable setting I adjusted it to 1.5m. But I get overcurrent during calibration, and 1563a? The voltage of the battery is 11.66v. Is my cable setting...
  5. H

    Bms shuts down at 30v and then won't charge

    I bought a used ebike 350w 36v cheap. The battery is good i tested it and it went for about 20 miles, But i went down all the way to get all the juice out (test), and the battery shuts down at 30v. But when i try charging it, it seems it wont take charge. So i knew the bms shuts completly down...
  6. H

    Ebike/ voltage cutoff How?

    Lvc*
  7. H

    Ebike/ voltage cutoff How?

    Right know I'm checking the volt on the LCD, but could be even better if it could be set to shut off when it reaches a specific voltage, for safety reason :-) I will be back home on 2 day, then I will check for LCD on display :-)
  8. H

    Ebike/ voltage cutoff How?

    Wow thanks a lot! Everything I need to know :-)!
  9. H

    Ebike/ voltage cutoff How?

    I want my ebike LCD to shut OFF or cut off automatically, when I hit 45.6v I'm using 3 lipo battery in series. How can I make it happen? Advice?
  10. H

    How much can my 48v 35A controller handle?

    haha :-) Really liked the last thing you said, i agree you always want faster/better! - thank you sir :-)
  11. H

    How much can my 48v 35A controller handle?

    Thank you, I will do that. I was thinking on putting 14s lipo, that would give around 58v at fully charge. How fast could you go on 60v?
  12. H

    How much can my 48v 35A controller handle?

    I bought a hub kit, i would like to find out, how much voltage the controller can handle?
Back
Top