Search results

Date Relevance Most replies

  1. A

    TSDZ2 48v 2020 new firmware

    Tongsheng TSDZ2 36V 250W Mid Motor + Accessories with Break Coaster with V2 controller. Tongsheng display VLCD5 https://enerprof.de/en/motor-kits/display-parts/tongsheng/737/tongsheng-display-vlcd5-with-controll-part
  2. A

    TSDZ2 48v 2020 new firmware

    Same error for me with TSDZ2 v2. I moved the magnet away so it had no function. Now I get help over 25 km/h but the downside is that it doesn't show speed and odometer
  3. A

    New "TSDZ2 Torque Sensor Central Motor"

    I have done it. No change.
  4. A

    New "TSDZ2 Torque Sensor Central Motor"

    I have V2 and tried to change speed with VLDC5 but failed. For me, the engine pulled well up to about 20 km/h but never really good to 25 km/h. I moved the magnet away so it did not affect and now I have power from the engine all the way up to 25 km/h and even more if I want. This at the...
  5. A

    New "TSDZ2 Torque Sensor Central Motor"

    No pedal force TE = 85. With pedal force, TE increases. Previously, only TE was for pedal force control.
  6. A

    New "TSDZ2 Torque Sensor Central Motor"

    Under load, TE1 = 0. The value does not change.
  7. A

    New "TSDZ2 Torque Sensor Central Motor"

    I have a V2 control unit.
  8. A

    New "TSDZ2 Torque Sensor Central Motor"

    No pressure on the pedal.
  9. A

    New "TSDZ2 Torque Sensor Central Motor"

    Thanks! Works perfectly. TE = 85 and TE1 = 0
  10. A

    New "TSDZ2 Torque Sensor Central Motor"

    Press power and i buttons simultaneousfor 10 seconds under ODO menu, then only press to show “ODO”, “TRIP”, “AVG”, “TIME”, “TE”and “TE1”respectively. Does not work. Display turns off. What am I doing wrong?
  11. A

    TSDZ2 48v 2020 new firmware

    Does not stand on the pedal at any time. Maybe wait longer after I put on the display.
  12. A

    TSDZ2 48v 2020 new firmware

    As I wrote before when I moved the magnet so it came outside the sensor and set the display speed "limit to off", I got engine power over 25 km/h. Now I have noticed that sometimes it seems that the engine power has different positions when I start. If I off display = off and battery = off...
  13. A

    TSDZ2 48v 2020 new firmware

    I'll test tomorrow. I have the latest engine and there is no firmware other than the original yet. EDIT: Does not work without a magnet. Put the magnet back and then the motor does not work again. The speedometer showed speed but no power from the engine. OFF - ON without result. Now to the...
  14. A

    TSDZ2 48v 2020 new firmware

    Have not tried. Can I use without a magnet. Strange? I have the latest version and firmware 5.0
  15. A

    TSDZ2 48v 2020 new firmware

    Have I done. Otherwise I can not change Sd.
  16. A

    TSDZ2 48v 2020 new firmware

    Does not work. Changing the speed does not change the maximum speed.
  17. A

    TSDZ2 48v 2020 new firmware

    If you can not set the speed above 25 km/h, you have the new version. It does not matter what speed can be set in the menu. Maximum 25 km/h applies. One mistake is that not even 25 km/h is reached.
  18. A

    TSDZ2 48v 2020 new firmware

    Same from me. Why did the control box change? Did the old one work poorly? Easier to control the engine? Understand that many are waiting for new firmware for the new version. Difficult to cycle at the same speed as others when the engine loses power before 25 km/h which cannot be changed. :(
  19. A

    TSDZ2 48v 2020 new firmware

    @casainho When do you think there may be a new firmware where I can set the maximum speed? Now it is locked to a maximum of 25 km/h.
  20. A

    New "TSDZ2 Torque Sensor Central Motor"

    BB ring is tightened but the sound remains so it must be due to something else. What?
  21. A

    New "TSDZ2 Torque Sensor Central Motor"

    I have a squeaky sound when I start sometimes. Hear at every pedal stroke. Then disappears at a slightly higher load and higher speed. Where does that sound come from?
  22. A

    New "TSDZ2 Torque Sensor Central Motor"

    VLCD5 What do the numbers 6-35 mean during Power Setting (A)? Why not 1-30 instead of 6-35?
  23. A

    TSDZ2 48v 2020 new firmware

    Thanks! Perfect.
  24. A

    TSDZ2 48v 2020 new firmware

    No matter how hard I try, I will not succeed. May ask for help from a knowledgeable Paypal user.
  25. A

    TSDZ2 48v 2020 new firmware

    I have tried these names and get the answer. We can not find paypal.me/jorgecasa. Try entering his or her mobile number or email address. We can not find paypal.me. Try entering his or her mobile number or email address. We can not find jorgecasa. Try entering his or her mobile number or email...
Back
Top