My next build has a 24T drive chainring and 50T driven sprocket for a gain ratio of 1.0, and thus will not be pedaled with force.
I'd like to save weight and use light motorbike-style footpegs rather than full pedals.
Most similar threads relate to footpegs directly onto/into the bottom bracket.
What would you do for light footpegs for 9/16"-20tpi crankarms?
Long 9/16"-20tpi bolts inside knurled 1-5/8" PVC tubes? May not be any cheaper or lighter than pedals.
Use bare replacement spindles with grip tape? Aliexpress has "titanium" for under $18 shipped/pair. Would need a large flat washer on the end to decrease injury risk in an accident.
I'd like to save weight and use light motorbike-style footpegs rather than full pedals.
Most similar threads relate to footpegs directly onto/into the bottom bracket.
What would you do for light footpegs for 9/16"-20tpi crankarms?
Long 9/16"-20tpi bolts inside knurled 1-5/8" PVC tubes? May not be any cheaper or lighter than pedals.
Use bare replacement spindles with grip tape? Aliexpress has "titanium" for under $18 shipped/pair. Would need a large flat washer on the end to decrease injury risk in an accident.