Hello all!
For the past month I have been developing an advanced remote control for the Vesc that supports telemetry.
RollingGecko started an open source project similar to mine, and he did a fantastic job, however the project doesn't seem to advance that much so I decided to start my own from ground zero.
For this project I designed the remote enclosure to be both comfortable and compact.
The current revision has:
Features:
Initial design screenshots:
If you are interested in this project please let me know so that I continue to work on it
For the past month I have been developing an advanced remote control for the Vesc that supports telemetry.
RollingGecko started an open source project similar to mine, and he did a fantastic job, however the project doesn't seem to advance that much so I decided to start my own from ground zero.
For this project I designed the remote enclosure to be both comfortable and compact.
The current revision has:
- -0.95 inch RGB OLED display
-Adafruit feather ARM Cortex M0 board, built in battery charger
-2000mAh battery
-NRF24L01
-Analog joystick
Features:
- -Colored OLED display
-Shows both remote and board battery level
-Display current speed
-Display current signal strength
-Configurable riding mode: slow, medium and fast
-Can turn on/off your longboard/skateboard Light effects
-Cruise control
-Reverse direction
-Distance traveled
-and much more to come
Initial design screenshots:
If you are interested in this project please let me know so that I continue to work on it