Dominique DB
1 mW
- Joined
- Jul 16, 2019
- Messages
- 12
The laws regarding electric bikes have just changed in Belgium allowing us to use a throttle and go up to 1000W without licence and registration or insurance, so I decided to buy the bafang bbs02, and I'm loving it.
My uncle however has a pedal assistance only bike, but would like to have a throttle as well, the easiest thing to do in his case would be to buy a new controller seeing as his original controller does not have the connector for a throttle, but on https://endless-sphere.com/forums/viewtopic.php?f=3&t=63242&hilit=ikea+throttle blueswede added a throttle anyway on his own controller, so I figure with the help of this forum I too could make it work.
Where do you think the ground, +5v and signal from the throttle should go on this pcb , if adding a throttle to this controller is even possible.
My uncle however has a pedal assistance only bike, but would like to have a throttle as well, the easiest thing to do in his case would be to buy a new controller seeing as his original controller does not have the connector for a throttle, but on https://endless-sphere.com/forums/viewtopic.php?f=3&t=63242&hilit=ikea+throttle blueswede added a throttle anyway on his own controller, so I figure with the help of this forum I too could make it work.
Where do you think the ground, +5v and signal from the throttle should go on this pcb , if adding a throttle to this controller is even possible.