Time to sell some Cheap FOCER 2 V1.0's
For more details here is the development thread for this VESC6 compatible electronic speed controller. It was developed buy a member here.
https://endless-sphere.com/forums/viewtopic.php?f=30&t=103465
https://forum.esk8.news/t/cheap-focer-2-open-source-low-cost-vesc-6-based-esc-v0-9-release-beta-testing-ongoing/
All boards are partly assembled (All SMT parts soldered) Firmware is loaded and checked for any faults. No IMU's included.
I am located in Ontario Canada but will ship to the US as well.
Included in the price is a $5 per board donation to @shaman who made this happen.
Shipping will be Canada post expedited parcel or USPS small packet. Should be under $20 shipped anywhere in North America. Order two to save on shipping.
No matter what some soldering will be required this is a DIY project. If you really need me to solder leads/connectors for you send me a DM and we can figure something out.
**No through hole DIY kit**
**Tested CFOC2 board without through hole components soldered**:
**Price ($45 USD $60 CAD)**:
**All components soldered DIY kit**
**Attach the leads of your choice and a heatsink and go**:
**Price ($56 USD $75 CAD)**:
**All components soldered DIY kit + heatsink**
**Attach the leads of your choice and go**:
**Price ($63 USD $85 CAD)**:
For more details here is the development thread for this VESC6 compatible electronic speed controller. It was developed buy a member here.
https://endless-sphere.com/forums/viewtopic.php?f=30&t=103465
https://forum.esk8.news/t/cheap-focer-2-open-source-low-cost-vesc-6-based-esc-v0-9-release-beta-testing-ongoing/
All boards are partly assembled (All SMT parts soldered) Firmware is loaded and checked for any faults. No IMU's included.
I am located in Ontario Canada but will ship to the US as well.
Included in the price is a $5 per board donation to @shaman who made this happen.
Shipping will be Canada post expedited parcel or USPS small packet. Should be under $20 shipped anywhere in North America. Order two to save on shipping.
No matter what some soldering will be required this is a DIY project. If you really need me to solder leads/connectors for you send me a DM and we can figure something out.
**No through hole DIY kit**
**Tested CFOC2 board without through hole components soldered**:
**Price ($45 USD $60 CAD)**:
**All components soldered DIY kit**
**Attach the leads of your choice and a heatsink and go**:
**Price ($56 USD $75 CAD)**:
**All components soldered DIY kit + heatsink**
**Attach the leads of your choice and go**:
**Price ($63 USD $85 CAD)**: