There is so much in this forum it is dizzying.
Here's my project. I have a Razor E300 that I have installed a 1500 watt brushless outrunner. My esc is a bit underrated for this project, but in testing its holding up. This is a regular RC 65A 4-6s model. I have a throttle with voltage display and keyswitch. That component has a hall effect throttle. Now I understand that with a micro controller the signal can be processed to output a PWM signal that will talk to the ESC.
I need help with more specific examples of this done. I have seen numerous YouTube videos concerning this conversion, but all of them leave out important information to be to duplicate the results.
Help,
Ken
Here's my project. I have a Razor E300 that I have installed a 1500 watt brushless outrunner. My esc is a bit underrated for this project, but in testing its holding up. This is a regular RC 65A 4-6s model. I have a throttle with voltage display and keyswitch. That component has a hall effect throttle. Now I understand that with a micro controller the signal can be processed to output a PWM signal that will talk to the ESC.
I need help with more specific examples of this done. I have seen numerous YouTube videos concerning this conversion, but all of them leave out important information to be to duplicate the results.
Help,
Ken