I'd really like to make this bike operational again. It's in pretty rough shape though. The speed controller and battery are missing, and the wire that goes into the rear hub motor was cut. There's no markings on the bike indicating brand or model number.
I was hoping to test the motor to see if it even works. But even assuming it does work, I have no idea how I would find compatible parts and wire the motor up.
Pictures attached. The pic with the closeup of the wires is what leads into the motor.
The wires:
Part #'s I found on some of the components:
Thanks very much for any advice!
Pictures (I had trouble attaching them directly, so uploaded to imgur.com instead):
https://imgur.com/a/ezQ07Tr
I was hoping to test the motor to see if it even works. But even assuming it does work, I have no idea how I would find compatible parts and wire the motor up.
Pictures attached. The pic with the closeup of the wires is what leads into the motor.
The wires:
- 3 thicker wires (power wires?): Brown, Green, Blue
5 thin wires (presumably for the hall sensors?): black, red, green, blue, yellow
Part #'s I found on some of the components:
- On the motor hub, it says 500w-12054045
On the rim of the wheels it says CST e-bike pro 3811 16x3.0 36F c-1488-72
On the brake hub, there’s some rusted over letters and numbers, but they are hard to make out. But it looks like TIAN YU 100 BRAKE
On the back of the brake handle says “Wuxing” 65P-D0
Thanks very much for any advice!
Pictures (I had trouble attaching them directly, so uploaded to imgur.com instead):
https://imgur.com/a/ezQ07Tr