SkunkyFartz
1 mW
Hello!
Okay so, this might sound odd but how much SHOULD I be using on a 48v 1500w direct drive motor?
I'm currently running a programmed 48v controller. Pulling in 45amps.
With the 48v 1500w direct drive rear motor.
On a 52v 19.2ah battery capable of pushing 45amps.
I've read that I might be pulling to many amps for the rear motor to handle.
I've opened it up and installed statorade and it helped alleviate the heat somewhat. Maybe I should install the hub sinks as well.....
But should I just drop the amps in the controller setting to lower than 45amps?
Or
Have faith in the statorade + hub sink, set up.
Any input is welcomed. Even how to make banana pancakes
Okay so, this might sound odd but how much SHOULD I be using on a 48v 1500w direct drive motor?
I'm currently running a programmed 48v controller. Pulling in 45amps.
With the 48v 1500w direct drive rear motor.
On a 52v 19.2ah battery capable of pushing 45amps.
I've read that I might be pulling to many amps for the rear motor to handle.
I've opened it up and installed statorade and it helped alleviate the heat somewhat. Maybe I should install the hub sinks as well.....
But should I just drop the amps in the controller setting to lower than 45amps?
Or
Have faith in the statorade + hub sink, set up.
Any input is welcomed. Even how to make banana pancakes