I am building a surron clone at the moment, it has a QS165 motor, fardriver nd72360 ESC, and generic 72V battery off of Amazon. I’ve got most of the frame assembled and everything looks good besides the fact that my electronics aren’t working. I just received the fardriver in the mail today and after some quick soldering and connecting the ESC will turn on, but the throttle won’t turn the motor. I’ve tried 2 different throttles, both brand new but all it does is beep twice, any ideas? I’ll attach a video of what it sounds like if needed.
Fardriver 72360 beeps twice, won’t do anything after that.
- Thread starter xoddx
- Start date
A-DamW
100 W
I don't have any working knowledge of Fardriver controllers, but you may have to lookup the manual and/or connect to the controller and configure the throttle and possibly other settings.
Did it come with a programming cable or bluetooth dongle?
Product page:
ND72360 | far-driver
PC software download:
Controller Software and App | far-driver
DuckDuckGo search for fardriver nd72360 - tons of results:
fardriver nd72360 at DuckDuckGo
Did it come with a programming cable or bluetooth dongle?
Product page:
ND72360 | far-driver
PC software download:
Controller Software and App | far-driver
DuckDuckGo search for fardriver nd72360 - tons of results:
fardriver nd72360 at DuckDuckGo
Last edited:
It came with the Bluetooth dongle but only which can be used after it is successfully booted, which isn’t very possible in my situation. The throttle itself shouldn’t be the issue. Do you think maybe a bad solder around the electric lock/ignition would cause it to fail? Surely not if it’s turning on and indicating power right?