This is my first post here. I found lots of good information on this forum when I was planning my ebike/kit purchase, and I thought somebody else may find my experience helpful. My review will not be very technical since I don't really understand the technology, but I'll try to give an accurate description of the kit, how I use it and how well it works for me.
eZee kit:
400 watt internally geared eZee brushless hub motor laced in a double walled rim
20A motor controller, with 4 machine screws and washers
160mm Shimano disc rotor
Schwalbe Marathon Plus Reflex 700x38c tire
thumb throttle
connector housing, zip ties
Battery: 36V 14Ah LiMn eZee battery pack, with 4A aluminum charger
Accessories & hardware:
Cycle Analyst with speedometer cable
GRIN Front Torque Arm for mounting on forks with fender eyelets
2 spacer C washers
bag for eZee flat batteries
multi-brightness Cycle Lumenator 1000 Lumen ebike light, 15-100V input range
extension cable for Lumenator
0.6 Watt 8 LED waterproof rear ebike light with button, 12-100V input range
silicone tape
All of the above (except the tape) was bought at Grin in Vancouver http://www.ebikes.ca. I don't remember the prices but I'll look them up if I can find the receipt. I looked at the kit in the store before ordering, which was quite helpful in terms of helping me select the right bike and bike rack for the conversion. Ordering via web was really easy. I picked up the kit and paid the day after ordering, although I believe it was ready for pickup the same day. The disc rotor was missing, so I had to go back to pick it up. But I ended up going back to the store a few more times for the accessories, so it didn't really matter.
Bike and rack:
2010 Rocky Mountain Metropolis NRT http://www.bikes.com/main+en+01_102+METROPOLIS_NRT.html?BIKE=867&CATID=3&SCATID=27&Y=2010
Filzer PR‑4 Rear Pannier Rack http://www.mec.ca/AST/ShopMEC/Cycling/PanniersBagsRacks/PRD~5022-461/filzer-pr-4-rear-pannier-rack.jsp
2 Voilé 24" Ski Straps (for securing the battery to the rack) http://www.mec.ca/AST/ShopMEC/Snowsports/TrainingAccessories/PRD~4014-452/voile-24-ski-strap.jsp
eZee kit:
400 watt internally geared eZee brushless hub motor laced in a double walled rim
20A motor controller, with 4 machine screws and washers
160mm Shimano disc rotor
Schwalbe Marathon Plus Reflex 700x38c tire
thumb throttle
connector housing, zip ties
Battery: 36V 14Ah LiMn eZee battery pack, with 4A aluminum charger
Accessories & hardware:
Cycle Analyst with speedometer cable
GRIN Front Torque Arm for mounting on forks with fender eyelets
2 spacer C washers
bag for eZee flat batteries
multi-brightness Cycle Lumenator 1000 Lumen ebike light, 15-100V input range
extension cable for Lumenator
0.6 Watt 8 LED waterproof rear ebike light with button, 12-100V input range
silicone tape
All of the above (except the tape) was bought at Grin in Vancouver http://www.ebikes.ca. I don't remember the prices but I'll look them up if I can find the receipt. I looked at the kit in the store before ordering, which was quite helpful in terms of helping me select the right bike and bike rack for the conversion. Ordering via web was really easy. I picked up the kit and paid the day after ordering, although I believe it was ready for pickup the same day. The disc rotor was missing, so I had to go back to pick it up. But I ended up going back to the store a few more times for the accessories, so it didn't really matter.
Bike and rack:
2010 Rocky Mountain Metropolis NRT http://www.bikes.com/main+en+01_102+METROPOLIS_NRT.html?BIKE=867&CATID=3&SCATID=27&Y=2010
Filzer PR‑4 Rear Pannier Rack http://www.mec.ca/AST/ShopMEC/Cycling/PanniersBagsRacks/PRD~5022-461/filzer-pr-4-rear-pannier-rack.jsp
2 Voilé 24" Ski Straps (for securing the battery to the rack) http://www.mec.ca/AST/ShopMEC/Snowsports/TrainingAccessories/PRD~4014-452/voile-24-ski-strap.jsp