RIPPERTON
100 W
They are just casting marks Jay
Andy you will still need to run a tube between the swingarm bearing inner races over the exposed part of the swingarm axle.
So the screw in the right frame can push the swingarm over to the left without flexing it.
My 2 short pieces of SW axle thread into the 2 alloy plates so they are effectively held either side of each bearing.
The 2 alloy plates still need to be welded to the frame
Andy you will still need to run a tube between the swingarm bearing inner races over the exposed part of the swingarm axle.
So the screw in the right frame can push the swingarm over to the left without flexing it.
My 2 short pieces of SW axle thread into the 2 alloy plates so they are effectively held either side of each bearing.
The 2 alloy plates still need to be welded to the frame