I bought a controller off Aliexpress which was supposed to have the connectors you can see in one of the attached pics
https://www.aliexpress.com/item/4000329604046.html (the 22A one)
It was supposed to have separate connectors for throttle and LCD (seller said they will short the LCD connector so I can use it without display) but it came with different set of connectors.
Seller is not being helpful at all so I will try my luck if some one here can help me with the wires.
In addition to the battery, hall sensors and phase wires, it has
2pin (du pont female) Red + Black: L + GND (low level brake)
2pin (du pont female) Red + Black: L + GND (low level brake)
2pin (du pont female) Red + Black: (D)MS + Battery Negative (???)
3pin (du pont male) Brown + Yellow + Black: 5 + XH + GND (PAS)
2pin (automotive female) Yellow + Black: ABS + GND (????)
6pin (du pont female) Red + Black + White + Green + Brown + Yellow: Z5 + GND + SD + D(M)S + Battery Positive + DM(S) (???)
https://www.dropbox.com/sh/k8e6mzb3xje19qm/AACqcItieOXhj3egvgU6VQvVa?dl=0
What are the connectors highlighted in red for?, and does it look possible to use this controller without a display ?
https://www.aliexpress.com/item/4000329604046.html (the 22A one)
It was supposed to have separate connectors for throttle and LCD (seller said they will short the LCD connector so I can use it without display) but it came with different set of connectors.
Seller is not being helpful at all so I will try my luck if some one here can help me with the wires.
In addition to the battery, hall sensors and phase wires, it has
2pin (du pont female) Red + Black: L + GND (low level brake)
2pin (du pont female) Red + Black: L + GND (low level brake)
2pin (du pont female) Red + Black: (D)MS + Battery Negative (???)
3pin (du pont male) Brown + Yellow + Black: 5 + XH + GND (PAS)
2pin (automotive female) Yellow + Black: ABS + GND (????)
6pin (du pont female) Red + Black + White + Green + Brown + Yellow: Z5 + GND + SD + D(M)S + Battery Positive + DM(S) (???)
https://www.dropbox.com/sh/k8e6mzb3xje19qm/AACqcItieOXhj3egvgU6VQvVa?dl=0
What are the connectors highlighted in red for?, and does it look possible to use this controller without a display ?