Makerbase VESC 84200HP 84V 200A (possible bug)

[flez1966]

Well I jumped and ordered the new Makerbase VESC 84200HP 84V 200A vesc,

This post will get more facts added as I explore it. I'm happy with the build quality but not the cable clearances for power/phase and the aux out(sig) is not working in fact putting voktage on it can fry the processor

edit1
motor wiring complete and a painless auto setup, all looks fine and then I needed to get the bikes key code ignition connected to turn it on and off...
fail...
the SW wire if floating lets the vesc come on, everytime.... but ground it to turn it off, only turns off every other grounding....
so once on, you have to off-on-off... smh....

 

[zachleedogg]

Ask the designer here. He is active on the Esk8 forum. maybe its a known issue. I actually found a few bugs in the design (including the AUX OUT issue) and mentioned it to him.

New version 84V/200A VESC motherboard, using INA241! testing!Provide schematic diagram

Vesc app show motor current, not battery current. Also, an mxus 3k will be a dog at that low amperage. 200-300a is where they shine

forum.esk8.news

 

[flez1966]

Ask the designer here. He is active on the Esk8 forum. maybe its a known issue. I actually found a few bugs in the design (including the AUX OUT issue) and mentioned it to him.

New version 84V/200A VESC motherboard, using INA241! testing!Provide schematic diagram

Vesc app show motor current, not battery current. Also, an mxus 3k will be a dog at that low amperage. 200-300a is where they shine

forum.esk8.news

yeah posted week or so ago, think he's busy

 

[markglos]

Ask the designer here. He is active on the Esk8 forum. maybe its a known issue. I actually found a few bugs in the design (including the AUX OUT issue) and mentioned it to him.

New version 84V/200A VESC motherboard, using INA241! testing!Provide schematic diagram

Vesc app show motor current, not battery current. Also, an mxus 3k will be a dog at that low amperage. 200-300a is where they shine

forum.esk8.news

I've got a 84100 on its way to me, just passed customs.
Does the aux out not work?
Any other issues to watch out for? I'm currently running a 75100 and bought this as a spare but gonna test it out when it arrives to make sure all OK as had another 75100 that blew a mosfets as soon as i plugged it in.

yeah posted week or so ago, think he's busy

.
How have you been getting on with yours?