Animalector
10 kW
feel free to call me Andy....
I've split the schematic into three separate sheets and 3 separate PCB's so I can do some proper Net checking.
The good news is that there are no routing errors, it is as per the schematic. which makes it all the more important to get the schematic right. tomorrow I'll go through it again, looking for errors, most common errors are missed GND / +5V connections etc.. and wire-connections that look connected but are not.
Then I might bite the bullet and get some PCB's done up.
It's a slow process, I drive an hour each way to work, and enjoy playing with my 21 month old son in the afternoons, so free time is limited.
Thanks for showing interest. I'll update here as things develop.
Andy
I've split the schematic into three separate sheets and 3 separate PCB's so I can do some proper Net checking.
The good news is that there are no routing errors, it is as per the schematic. which makes it all the more important to get the schematic right. tomorrow I'll go through it again, looking for errors, most common errors are missed GND / +5V connections etc.. and wire-connections that look connected but are not.
Then I might bite the bullet and get some PCB's done up.
It's a slow process, I drive an hour each way to work, and enjoy playing with my 21 month old son in the afternoons, so free time is limited.
Thanks for showing interest. I'll update here as things develop.
Andy