My new motor and controller. (Big block style)

[Skalabala]

Hey guys

This is my new motor and controller

The motor is supposed to be 16 pole.

Do you guys want to see the inside?

 

[Nobuo]

really interesting, how much rated power? so it is an Ac Induction Motor?

 

[Skalabala]

really interesting, how much rated power? so it is an Ac Induction Motor?

Hey bud, it is +- the same as all the other big block motors.
Rated 48V 1000W but it has 16 neodymium magnet poles!
The controller says on the sticker 48V 60A 1200W

 

[Skalabala]

Nothing new.... I can not get the controller to work because I do not know how to.... Unknown wires....
Any ideas? Orange lock wire to battery + ? And what is with the brake to interrupt?

 

[Skalabala]

Also have this one now. Does not make sense to me

 

[Skalabala]

Well I have opened up the controller to see if I can get any wiser on what wire does what, but so far no luck
The fets are HY1808 :|

 

[Skalabala]

This might also help. PLease help me guys I am sure you all understand the frustration! I must see the motor spin up!!
1: Speedo output wire
2: Throttle black wire
3: Hall black wire
4: White wire that must be looped with other white wire for phase angle study?
5: Hall red wire
6: Throttle pink wire
7: White wire loops with Nr 4
8: Yellow green wire, no idea
9: Green white, goes to throttle plug
10: Purple, goes to throttle plug
11: Orange, no idea
12: Blue wire, goes to hall plug
13: Yellow wire, goes to hall plug
14: Green wire, goes to hall plug
15: Orange, slightly thicker than the other thin wires. Door lock? Ignition?

 

[Skalabala]

Hmmmmm... Wire 6 must go to the tab right next to it? VSP and +5V does not have continuity.

 

[Skalabala]

And wire 5(red hall 5V) is on 4.3V tab?
So wire 5 must go to 5V+ tab and wire 6 must go to 4.3V tab? :x

 

[Skalabala]

Ok it is working
Door lock wire goes to battery +
Throttle wires.
Pink> throttle +
Black> throttle -
GreenWhite> throttle signal

 

[methods]

Nice