RollingGecko
100 W
- Joined
- Jul 14, 2015
- Messages
- 110
Hi,
I used a simple voltage divisor with 2 resistors. I soldered it in a flying connection without PCB.
Depending on your quotient for voltage devisor your can set in the config.h:
//TX Voltage measurement
#define VOLTAGE_DIVISOR_TX 102.5
Regards
Andy
I used a simple voltage divisor with 2 resistors. I soldered it in a flying connection without PCB.
Depending on your quotient for voltage devisor your can set in the config.h:
//TX Voltage measurement
#define VOLTAGE_DIVISOR_TX 102.5
Regards
Andy