Inwo
10 kW
I'm tuning a pmac which I have running smoothly.
ME-3031 S6 Gen4 sevcon. Running in torque mode.
Motor is stable when powered on at zero speed.
With slight throttle F or R accelerates with about 10% torque. Runs away until braked to a stop.
Pushing car in neutral F or R has same effect.
Not intentionally using hill hold or inch modes.
Any ideas?
ME-3031 S6 Gen4 sevcon. Running in torque mode.
Motor is stable when powered on at zero speed.
With slight throttle F or R accelerates with about 10% torque. Runs away until braked to a stop.
Pushing car in neutral F or R has same effect.
Not intentionally using hill hold or inch modes.
Any ideas?