Stand up scooter motor, esc?

[calab]

I just need the 2kw+ motor and 10S ESC
Building the frame myself and asking how do I put the power to the wheel for the inrunner sk8?

Are Turnigy Aerodrive SK3 or SK8 any good?
Where do I buy the scooter wheel for it?
Body weight is 260lbs, and light cargo.

Is 80A 10S (36V) to much power for a stand up scooter?
I am 260lbs, I need it to be 36V as my ebike is 36V Li-Ion (42V max).

I will assume this one is an In-runner
3500W Turnigy SK8 6374-149KV Sensored Brushless Motor (14P)
https://hobbyking.com/en_us/turnigy-sk8-6374-149kv-sensored-brushless-motor-14p.html?queryID=419cb01cda7abbcd9490fdceb35b131c&objectID=74469&indexName=hbk_live_products_analytics


ESC
YEP 120A HV (4~14S) Marine Brushless Speed Controller (Opto)
https://hobbyking.com/en_us/yep-120a-hv-4-14s-marine-brushless-speed-controller-opto.html?queryID=4d6a7e4b58cb34a8a0b63697fe94b6a9&objectID=40132&indexName=hbk_live_products_analytics

AeroStar Advance 120A HV (6~12S) Brushless ESC (Opto)
https://hobbyking.com/en_us/aerostar-advance-120a-esc-opto.html?queryID=4d6a7e4b58cb34a8a0b63697fe94b6a9&objectID=46341&indexName=hbk_live_products_analytics

 

[BalorNG]

No, that's an outrunner. It would be plenty for your needs with adequate reduction, but 80A is too much for that motor, maybe in peaks - it will not take much more than 50A longerm.

I recummend using a new flipsky 'e-bike' VESC, much better formfactor, and allows sensored operation (you do NOT want to ride pure sensorless).

 

[Johnlee]

Hi, 2KW motor would require stronger esc, I'm the designer and manufacture of this vesc, single ubox , you can have a look at it :
https://spintend.com/products/75v-100a-single-esc-single-ubox-based-on-vesc
or in forum here :https://forum.esk8.news/t/spintend-single-75v100a-beta-comes/54188
Any questions, you can send me message.
Regards!
John