It may be rocks and sticks bumping into you derailleur? Ive had that once or twice on my single speed, otherwise its been pretty good.
Thought id pop this pic in here, as my builds-for-sale progress, and as i mentioned i have a new camera!
Pretty happy with the front wheels, 20mm chosen hubs, alex volar rims. I think i have the rotor on the wrong way though?...
Next up is ordering some more cells and actually starting to install, trim n chop n tighten to get this thing going - oh and waiting for a few more key components to turn up i just ordered , like brakes, ive gone with shimano m7000 and ICE pads, so that should be choice.
I have an 8 speed freewheel on the way, any recommendations for shifters? im thinking left handed trigger shifter. leaving the right hand for throttle, regen / buttons / thumbs up & flipping the bird etc.
By my calculations a 127mm square taper BB with slightly flared cranks should fit the Alpha with mm to spare. However im going to get a octalink type for the alphas i think to be on the safe side. Will post my findings when my second square taper turns up - as i will test fit to check. That might help others out.
My smart BMS turned up too, so will report back on that soon too.
Thought id pop this pic in here, as my builds-for-sale progress, and as i mentioned i have a new camera!
Pretty happy with the front wheels, 20mm chosen hubs, alex volar rims. I think i have the rotor on the wrong way though?...
Next up is ordering some more cells and actually starting to install, trim n chop n tighten to get this thing going - oh and waiting for a few more key components to turn up i just ordered , like brakes, ive gone with shimano m7000 and ICE pads, so that should be choice.
I have an 8 speed freewheel on the way, any recommendations for shifters? im thinking left handed trigger shifter. leaving the right hand for throttle, regen / buttons / thumbs up & flipping the bird etc.
By my calculations a 127mm square taper BB with slightly flared cranks should fit the Alpha with mm to spare. However im going to get a octalink type for the alphas i think to be on the safe side. Will post my findings when my second square taper turns up - as i will test fit to check. That might help others out.
My smart BMS turned up too, so will report back on that soon too.