undercoverpenguin
1 mW
- Joined
- Feb 29, 2016
- Messages
- 11
Hey guys!
Recently I got a fantastic VESC from DIY/Torqueboards and got it working wonderfully on 4S.
Last night I decided to bump it up to 8S with another 4S lipo, the first time plugging it in, using 4S settings, it worked fabulously, albeit I was being dumb and did not hook it up to the tool to check for any errors, although there were no red lights.
I decided to unplug the batteries to charge them for a bit. After coming back and plugging the two lipos in, I also connected the VESC to the computer. Upon pulling the throttle I get hit with a quick spin and fault code DRV8302.
Releasing the throttle brings the fault code back to none, after that the motor did not move at all, and all farther inputs causes the DRV8302 fault code. Using the left/right arrow keys give me a ABS_Over_Current, while up/down gives me a DRV8302.
Considering this just worked flawlessly 15 minutes ago, I'm completely stumped on what occurred. There was no smoke, flash, pop, or burning either.
I have not tried to change anything in fear of farther damage.
My settings:
http://imgur.com/a/I9icW
Thank you for your help!
Recently I got a fantastic VESC from DIY/Torqueboards and got it working wonderfully on 4S.
Last night I decided to bump it up to 8S with another 4S lipo, the first time plugging it in, using 4S settings, it worked fabulously, albeit I was being dumb and did not hook it up to the tool to check for any errors, although there were no red lights.
I decided to unplug the batteries to charge them for a bit. After coming back and plugging the two lipos in, I also connected the VESC to the computer. Upon pulling the throttle I get hit with a quick spin and fault code DRV8302.
Releasing the throttle brings the fault code back to none, after that the motor did not move at all, and all farther inputs causes the DRV8302 fault code. Using the left/right arrow keys give me a ABS_Over_Current, while up/down gives me a DRV8302.
Considering this just worked flawlessly 15 minutes ago, I'm completely stumped on what occurred. There was no smoke, flash, pop, or burning either.
I have not tried to change anything in fear of farther damage.
My settings:
http://imgur.com/a/I9icW
Thank you for your help!