Jil
1 kW
Thanks Marc. Impressive bike !
Wolfeman said:Before....
After.....
Wolfeman said:Very cool Morganw. Nice build.
Chopcat said:I found that having access to the higher gears was not necessary on my build once you have power assisting you.
I have an Analogger & I'm not seeing anything helpful. It only logs human power and RPM, not raw voltage from the torque sensor or computed Nm torque. Here's a trip where I only pedaled for a hill & getting away from stops. The hill is from 0.711 to 1.152 km. Edit: the Analogger has two extra analog inputs that can be logged, so if we didn't already know some Sempus are faulty (see below), this would be a way to see the voltage dropping to zero or spiking high.Chopcat said:Out of interest would adding an annalogger be the way to look at all the signals to diagnose the issue. I find mine varies the output when pedalling at a constant speed and effort. You can be going along at 300W and then suddenly up to 900W and then back again and i cant quite diagnose what the cause might be.
SOLO 12 said:Начало
amberwolf said:SOLO 12 said:Начало
What?
Sorry, but there's almost no one here that can read cyrillic. Almost everyone here can at least read English, so I would recommend translating whatever you post into English if you want them to know what you're saying.
KalistoBG said:some pic of my last build