Ishikawa

I have been clearing the track for a month now. Mostly blackberry, scotch broom and other small trees. Don't need a chainsaw yet, a...

Did a test run using only one bike on my railcart and it worked just fine. Plenty of weight and rigidity to the cart structure. Still...

Lots of good info, thanks. I originally set the wheel spacing just a little too tight on the rails, the poly flanges would rub a...

2nd test ride near Saluda, NC. Spent a lot of time clearing brush and trees from the railbed. At least the cart makes it easy to carry...

I just finished my rail bike project (really a rail cart) and did a short test ride on some abandoned tracks near Tryon, NC. Cart is...

The cart looks pretty good. Glad to see successful test run. It is still early in the season but plenty of good time ahead...

I originally wanted to mount the bike forks on one rail directly in the middle of the frame but our pedals would not clear the poly...

Hello, fellow railbike builder. This is only from my experience. I do not know if it is relevant to your build. I, too, measure the...

Did you look at this? https://www.amazon.com/Sunlite-Threadless-Repair-Bottom-Brackets/dp/B004E3QNXM?th=1

You can use a thread less BB