Search results

Date Relevance Most replies

  1. B

    LightningRods Smallblock kit at 3000W+ Review

    My 44,4 V, 27 Ah (=1200 Wh) pack weighs around 6,0 kg, too. In total my backpack (Deuter Attack 20) weighs around 10 kg, including water, some tools etc.. I don't have any problems with this load at all, even today when I rode 2:40 h on more or less rough singletrails. I would never think of...
  2. B

    Adaptto Mini-E/Max-E Owner's Thread

    Sorry, I can't tell you. I have a mid-drive. So I can't use regen.
  3. B

    Adaptto Mini-E/Max-E Owner's Thread

    You just have to read the next to last message. In best case they give you an solution within 1 day.
  4. B

    Adaptto Mini-E/Max-E Owner's Thread

    I eventually solved my problem with the throttle limits. Yesterday Oleg wrote me an e-mail that the testing guys from Adaptto found the same problem and that they will provide a new firmware maybe next week. Already today (only 1 day later) Oleg sent me an update for my display. After flashing...
  5. B

    Adaptto Mini-E/Max-E Owner's Thread

    Maybe this helps: Yesterday I was succesful in writing the firmware to the SD card. Unfortunately I did not make a picture of the message. I think the the message consisted of 3 words and no numbers (all error messages I got before had numbers like (No. 00)). Unfortunately the firmware update...
  6. B

    ADAPTTO Controllers - new functions discussion

    a remote button for the handle bar to switch the power modes with your thumb
  7. B

    Adaptto Mini-E/Max-E Owner's Thread

    Unfortunately this does not help. I also tried FAT32 and exFAT. Both with the same result. Can anybody translate this error message please?
  8. B

    Adaptto Mini-E/Max-E Owner's Thread

    Hi guys, again I am facing some problems with my Mini-E, partly concerning the throttle. After I have fixed the problem with my Domino throttle I realized that I have also an issue with saving the throttle limits. I can adjust the settings without any problems and they work well as long as the...
  9. B

    Adaptto Mini-E/Max-E Owner's Thread

    Looks good. I had the same idea to mount the display on the top tube to protect it in case of a crash. But I will use a carbon plate instead of wood :mrgreen: .
  10. B

    Adaptto Mini-E/Max-E Owner's Thread

    Welcome! :-) The symptoms were absolutely the same with my throttle. So I am pretty sure that the resistor will fix your problem.
  11. B

    Adaptto Mini-E/Max-E Owner's Thread

    Guys, you won't believe it! I made it, I really made it: my Domino throttle is finally working with my Adaptto!!! :D :D :D And the solution was really easy. Although you would not conceive it without some elementary knowledge about the Adaptto. And so it were the guys from Adaptto...
  12. B

    Adaptto Mini-E/Max-E Owner's Thread

    Of course I could do this further test but I am not sure if I can proof anything with it. Measuring on the pot (on the wires) I already got the result that the Domino should be ok but the Adappto does not 'see' the voltage for whatever reason. So I guess it is the Adaptto/display which is...
  13. B

    Adaptto Mini-E/Max-E Owner's Thread

    At the moment there is no connector at all. All wires are soldered directly together.
  14. B

    Adaptto Mini-E/Max-E Owner's Thread

    I tried every possible setting of the limits but nothing worked.
  15. B

    Adaptto Mini-E/Max-E Owner's Thread

    Unfortunately I don't have the Magura anymore. I gave it back to the manufacturer of my middrive and got the other throttles for testing. The Domino is the first one I bought separately. Meanwhile I think that the problem of the Magura was caused by a too high upper voltage on full throttle...
  16. B

    Adaptto Mini-E/Max-E Owner's Thread

    I don't know if I get you right but all the voltage measurements were done with the wires connected to the adaptto as described above. Assuming that the adaptto has a too low input impedance what would be the solution to fix this problem? I tried several throttles before, too. First one was...
  17. B

    Adaptto Mini-E/Max-E Owner's Thread

    Ahhhhhhhh, I am going mad!!!! To make sure that the connectors are not my problem I made the most radical step - I cut them off and soldered the wires directly together. Surprisingly no changes :roll: . Again only small reactions on the display when turning the throttle. The high voltage...
  18. B

    Adaptto Mini-E/Max-E Owner's Thread

    From the following questions you will see that I am not really an electrician. To be honest I am always happy not having burned down the house when changing a bulb :mrgreen: . This means that I just have to solder a 1 kOhm Resistor into the white wire, right? Or on another position? Can...
  19. B

    Adaptto Mini-E/Max-E Owner's Thread

    Hm, there's a cursor in the throttle limits panel? I've never seen it but I will check when I am at home. I always set the limits manually. When I am in the the thr linear panel and try to calibrate the throttle I can see a short reaction on the first degrees of the throttle angle. In this area...
  20. B

    Adaptto Mini-E/Max-E Owner's Thread

    I measured the voltage between 1 and 3 (constant value) and between 3 and 4 (changing value). For testing purposes I also changed the wires between 1 and 3, just to make sure that I do not need an inverted signal. But with this configuration I only got the 'turned too fast' warning at the...
  21. B

    Adaptto Mini-E/Max-E Owner's Thread

    Hi guys, I still have no clue why the throttle does not work with my controller. Because the voltages on the throttle side (from the perspective of the connector) are ok I assume that the connector itself might be the problem. I filed off a bit of the plastic of the connectors to make the...
  22. B

    Adaptto Mini-E/Max-E Owner's Thread

    Today I tested the potentiometer myself. When I measure the resistance between white (GND) and light blue (+5V) I get 4.95 kOhm. Specification says 5 kOhm +/-10%, so this should be ok. Next I measured between white (GND) and nero (wiper) and twisted the grip from 0 to 100% and these were the...
  23. B

    Adaptto Mini-E/Max-E Owner's Thread

    Now I soldered everything like it should be, even the second green wire to the white wire of the connector. But same issue again. Absolutely nothing changed. I am pretty sure that the connectors (on throttle and display) are ok because the controller works perfect with my hall throttle. So...
  24. B

    Adaptto Mini-E/Max-E Owner's Thread

    Ok, thanks, guys, This evening I will connect all wires (just in case...) and try if it works then.
  25. B

    Adaptto Mini-E/Max-E Owner's Thread

    I bought a domino throttle this week to use it with my Adaptto Mini-E. Very nice grip on first sight. Looks and feels like a 'real' motorbike throttle. But again I have problems to make it work correctly on my bike (I never managed to adapt a Magura Grip to my controller without annoying...
Back
Top