Search results

Date Relevance Most replies

  1. I

    Cycle Analyst V3 + LR Big Bock + Lyen Controller Setup issue

    Hello all I'm having some configuration issues with my CA. I have a large 60v Luna Battery, a 60 Amp Lyen Controller for the LR Big Block and the Big block enigne on the luna cargo. I have two main issues: 1) Pedal assist not working I have set up a custome magnet setup on the chain ring for...
  2. I

    PAS for 57 Chainring on 100/168 ISIS BB

    Hello everyone I'm trying to get a PAS to work on my Luna Cargo but have hit a roadblock. I've tried a few solutions, none of which worked. 1) The BEAMTS torque sensor, does not fit onto the Luna frame with my battery/motor. 2) The PAS 12P sensor from grin will not fit on an ISIS BB 3) The...
  3. I

    Lightning Rod Big Block, Luna Cargo, Rohloff and Torque

    The speedbone unfortunately does not fit onto my luna cargo frame. The deep dropouts and disc brake placement make it impossible. I am going the way of blocking the speedbone axleplate under the disc brake mount. In the picture was the monkeybone disc brake mount since the magura mount was...
  4. I

    Luna / LR Big Block build

    A picture is worth a thousand words! I could not understand what you were suggesting in the email but I got it now! Thanks!!! I am going the way of blocking the speedbone axleplate under the disc brake mount: In the picture was the monkeybone disc brake mount since the magura mount was on...
  5. I

    Lunacycle Cargo Bike Info Request

    Aha, good tip! It would be much better than what the axleplate was designed for (after the axle) but I have lost all faith in the strength of the luna cargo's dropouts. I am going the way of blocking the speedbone axleplate under the disc brake mount. In the picture was the monkeybone disc...
  6. I

    Lunacycle Cargo Bike Info Request

    No don't do this, under no circumstance with this frame. I did just that and it basically bent the dropouts to the point of losing the wheel. So if you are running a powerful motor like the LR big block and a powerful enough controller DO NOT IN ANY CIRCUMSTANCE ATTACH THE TORQUE AXLEPLATE TO...
  7. I

    Lunacycle Cargo Bike Info Request

    Well, I've run into a roadblock with the rohloff IGH. My previous solution to bolt the torque arm to the rear axleplate ended with me bending the rear dropouts out of shape. I bought the monkeybone but since the frame is slightly inadequate in the rear brake position (off by a few mm) the...
  8. I

    Luna / LR Big Block build

    I got a question for you guys with the IGH and the big block. I cannot figure out a way to attach the torque axle plate of the rohloff to this frame. - I bolted it to the rear dropouts and it bent the rear dropouts to hell - I bought the monkeybone to attach it to the disc brake mount but the...
  9. I

    Lightning Rod Big Block, Luna Cargo, Rohloff and Torque

    Sorry For the late reply, hurricane Mathew preparations and stuff got me busy for the last few days. I had not taken picks of the bent out forks, but I took a photo now. They are almost back to where they were, does not lok like it is cracked but I do not know. Can see scratch marks from the...
  10. I

    Lightning Rod Big Block, Luna Cargo, Rohloff and Torque

    Well I've hit a snag and need the input of some experienced builders. I've recently finished building a luna cargo fat bike with the LR big block, powered by the 60v, 25ah Luna Battry and the Lyen 65 amp controller. Had a 52t front crank going to the LR big block and 16t to 16t Motor to...
  11. I

    Lunacycle Cargo Bike Info Request

    Thanks for the tip Marin, gonna look into the aux port for cycle analyst. Cannot get the pedal assist sensor to work for now. But I still have to configure the CA V3. When looking in the setup menu, I see it gets very much into details about the battery/throttle/etc. Wrote to luna asking for...
  12. I

    Lunacycle Cargo Bike Info Request

    Got my bike all assembled, it has been a journey. Took it for a test run, and basically figured out I built an electric motorcycle and not a bike really. This thing is a monster. Got to tweak it around a bit. I have some questions to the Luna cargo frame builders about some things I could...
  13. I

    Lunacycle Cargo Bike Info Request

    I've fixed pictures, thanks for pointing that out to me. Bowhunter, now that I have images up there I think the situation is clearer. If I were to bend the supports TOWARDS each other (which I think is what you are suggesting, I could get more space to have the motor fit without hitting them...
  14. I

    Lunacycle Cargo Bike Info Request

    I don't know how to describe this, one support is more curved INWARDS towards the seatpost than the other. About 1/8 inch off. If they were bent outwards or inwards to the side of the bike, I could bend them into shape easily. Like this though, I don't know how. I tried hammering it back but...
  15. I

    Luna / LR Big Block build

    Hello, I think I have the same problem. My LR drive will not fit into the luna frame. If I put the plastic bits in that attache to the seatpost, the motor will not be flush against the bottom. If it is flush against the bottom, it wont line up properly with the seatpost or be in a stright...
  16. I

    Lunacycle Cargo Bike Info Request

    OK the frame is finally here. How on earth do you remove the front forks from this thing? It seems the whole stem/forks are fused together with rust. The top bolt doesn't actually hold anything. I think I need to throw out the stem and get a new one that isn't rust coated. The front fork...
  17. I

    Lunacycle Cargo Bike Info Request

    Thanks for that, that's almost the same size as my large size framed bike (to a 1/4 inch difference). Looks like it will do nicely. Will try to post pictures as things come together. How do you guys protect your battery against theft? Does the metal box on luna lock/bolt shut or will I have...
  18. I

    Lunacycle Cargo Bike Info Request

    Perfect, thanks Marin. Seatpost clamp to BB would also work as a dimension if that is easier. Thanks
  19. I

    Lunacycle Cargo Bike Info Request

    Thank you for the replies guys, it helps a lot. Marin, when you say "Rohloff" after Disc brake you mean the standard option or the oem/oem2 option? Great tip on left shifter, will get that. Top of seatpost clamp from floor is important to see how I wil fit on it. I got my answer for...
  20. I

    Lunacycle Cargo Bike Info Request

    Hello, I'm looking to build a lunacycle mid drive E-Bike with the LR big block. I wanted to ask some questions to make sure I'm not making any mistakes in some parts I'm getting. 1) Most important is the rohloff rear hub. I'm looking at getting the Speedhup 500/14 TS DB Standard (non tandem...
Back
Top