Search results

Date Relevance Most replies

  1. X

    Odd Regen Behavior involving Phaserunner, all axle hub and a shunt

    For the first part, it seems to be standard behavior. The regen will try to apply a certain breaking torque. The slower you go, the harder it will be to apply the regen torque. Past to a point, where the braking would be way too small. Then, the phaserunner, will use power to brake. It's a...
  2. X

    Analysis of regen on an ebike

    Thanks to both of you. I'll look into that!
  3. X

    Analysis of regen on an ebike

    Well I'm a little bit at loss finding out those type of controllers. I'm looking for a low power (I intend to use it around 300W), regen capable controller. As it's for a not tech savy person, the phaserunner are a complete overkill (in price and in functionnality) for this task. Do you know...
  4. X

    Baserunner + Grin All-Axle Motor settings

    I know it's way late. I stumbled upon your message. I have the same vibration problem with a phaserunner and a Grin All-Axle motor. But no problem for regen. Turns out, I did autonune on the engine instead of loading Grin premade settings. However, after loading Grin settings for the engine, the...
  5. X

    Cycle Analyst V3 preview and first beta release

    Yep, it was this one. Sorry it didn't help.
  6. X

    Cycle Analyst V3 preview and first beta release

    Wow, this is so obvious that I feel stupid now. ;) It's working great with the latest firmware. Thank you very much for the answer and all your work, I really love your products (got the thru axle motor, baserunner and CA of course).
  7. X

    Cycle Analyst V3 preview and first beta release

    Hello, is it cycling regularly? If I remember well there is a setting that will enable automatic cycling of the menus. Maybe you activated it by mistake. If not, you should check connection issue with the cycling button, maye there is a fault and it activate from time to time.
  8. X

    Cycle Analyst V3 preview and first beta release

    Hello. I'n sorry if this has been answered already. I have a very old CA3-DPS from 2015, with goldenmotor controler, with the integrated speed sensor. It had an unrecognized version by the CAsStup utility. It was something like r1b16 (I didn't put too much attention to it). When I updated to...
  9. X

    how to know if you're current or voltage limited for top speed ?

    With my bicycle, I get around 80% of my no load speed (42km/h -> 55km/h). So you might be limited by your voltage. But on the other hand, at 80km/h, air resistance is so big that I doubt 4000W would be enough to go faster. One last thing, those scooter are really not the best for stability and...
  10. X

    phaserunner set up

    Even better than the draft document for the phaserunner. The official page, which contains everything you need: https://ebikes.ca/product-info/grin-products/phaserunner.html Revised manual, troubleshooting, there is even a video for the BSSHD. Grin must be very bad at ranking in google, if you...
  11. X

    bluetooth BMS?

    Thank you very much! I went through the thread down to page 45, didn't saw your post. It should get more publicity!
  12. X

    bluetooth BMS?

    Hello. I've been happily playing with the XiaoXiang (yellow elephant) android App for quite some time now. This thread helped me a lot to get a hang of the BMS, thank's a lot to all the contributors. I recently updated my phone, for an android 10, and the apk that I got, I don't remember where...
  13. X

    bluetooth BMS?

    Well, I can't even connect to the BMS, the connection fail each timeeither via BT or USB, there is no lock/unlock thing. The seller asked me to brush the bms to remove any short, and to try to charge the battery via the BMS, maybe it will unlock it. I'll keep you posted.
  14. X

    bluetooth BMS?

    I realise that my message was confusing. I plugged a "dumb" BMS, to the battery, and got the battery working. I don't want to use this BMS, as I can't set treshold on it, and it won't balance charge as well as the smart BMS. My goal is to limit the battery between 2.9 and 4V/cell, in order to...
  15. X

    bluetooth BMS?

    Hi again, alright, glad to hear that. That's what I forgot to tell. B+ to C- and B+ to P- both start a 24V, and stabilize down at 17-18V after a few seconds. When I connect a load, even a small one...
  16. X

    bluetooth BMS?

    Hello, thanks for your help. I know it was shorted, because I (at 4am), connected the battery -, to B- on the BMS, and then, the battery + on P- on the BMS. Instead of wiring the load between P- and Battery +. That's basically a 0 ohm load, and a lot of amps that should have gone through the...
  17. X

    bluetooth BMS?

    Hello. I have this BMS: https://www.aliexpress.com/item/14S-30A-active-bms-2017-new-Li-ion-smart-bms-pcm-with-android-Bluetooth-app-UART/32841020357.html?spm=a2g0s.9042311.0.0.70d84c4dx419sL Which has been thoroughly examined here. On first install of the BMS, the 4am (obviously tired) me...
  18. X

    CHEAP NEW ORIGINAL 18650 21700 BATTERY CELLS, POUCHES AND PACKS

    Just received 120 cells. Nice packaging. I'm testing come of them right now, but, I'm pretty sure everything is fine. Another happy customer!
  19. X

    Reliable source for non fake cells?

    Thought about tumish? He is not in the USA, but he is quite reliable.
  20. X

    CHEAP NEW ORIGINAL 18650 21700 BATTERY CELLS, POUCHES AND PACKS

    @molten-core Just read the customer responses over the 28 pages of this thread. I'd say it's his waranty. It's going for 4 years, and it seems to be going without a hitch. It's as good as it gets. Already bought 100 cells a few years ago. Will go blindly for 120 soon. As advertised, cells are...
Back
Top