10" wheelwith disc brake mount and sprocket mount?

[__Tango]

Hi folks.

I was wondering if anyone knows of a place that sells a 10" scooter wheel that has both a disc brake mount as well as a sprocket mount? I've mostly found 10" wheels with disc brakes and an inline motor mount, or 10" wheels with a sprocket mount and a drum brake, but not both.

I did find this: http://www.scooterparts4less.com/web_gas/DirtBike_Alum_Complete_Color_Rims.htm, but they haven't been very responsive to questions, and I also would prefer a wheel without spokes.

Thanks.

 

[ElectricGod]

I found these on ebay. They look to be decent quality considering the price and the wheels come is several designs. I didn't list any sprockets, but there are a zillion of them on ebay too.

hubs:
http://www.ebay.com/itm/261870264387
http://www.ebay.com/itm/251939309228

Wheels:
http://www.ebay.com/itm/252186567443
http://www.ebay.com/itm/252186830639

Tires:
http://www.ebay.com/itm/111817272877

Hydraulic brakes:
http://www.ebay.com/itm/151554106292?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT

 

[__Tango]

Thanks! I didn't think about getting the rims separate from the hub. Now I just need to get it to work with a dropout that expects a 15mm axle. Thanks!

 

[ElectricGod]

Thanks! I didn't think about getting the rims separate from the hub. Now I just need to get it to work with a dropout that expects a 15mm axle. Thanks!

That's easy too. Get those axle supports for the dropouts that are so common for hubs for bikes, but get them in the size you need or just make a couple out of some steel. An hours time, some drilling, some grinding and some filing and you are good to go!

 

[Scoot440]

They are spoked, but the Razor MX500 and MX650 rear wheels are 10" and have a sprocket and disc. You can often find complete bikes very cheap in your local want ads.

http://www.monsterscooterparts.com/ramxmxrewhco.html

 

[__Tango]

They are spoked, but the Razor MX500 and MX650 rear wheels are 10" and have a sprocket and disc. You can often find complete bikes very cheap in your local want ads.

http://www.monsterscooterparts.com/ramxmxrewhco.html

Cool. Thanks. I found a bunch of spoked wheels, but they mostly have 1.4 or 1.6" rims, so can only go to 2.5" tires. I did end up getting the solid wheel parts that ElectricGod posted. Still working on it, but I'll report back when I get it all installed.

 

[ElectricGod]

They are spoked, but the Razor MX500 and MX650 rear wheels are 10" and have a sprocket and disc. You can often find complete bikes very cheap in your local want ads.

http://www.monsterscooterparts.com/ramxmxrewhco.html

A looked and looked and saw the spoked wheels too. I wanted a wheel that was solid metal so that later if I wanted, I could add a hub transmission and bolt it straight to the rim.