endlessly_ending
10 W
- Joined
- Apr 27, 2013
- Messages
- 82
Congrats,
what kind of display is this?
what kind of display is this?
Got me. It says KT-LCD-3 and looks similar to the screen with my Sinewave controller from BMSBattery. It is different in having a separate button set and my original screen is an LCD1. The controller is sinewave. Very good instruction set with it.endlessly_ending said:Congrats,
what kind of display is this?
Doc, all my 2 motors have small round stickers that tell the Inches of the wheel the motor is intended for....
ecross said:panurge said:Yes, My order has taken a week to be ready (custom threads on one axle and 20" windings, among the firsts for them, to the other) and the shipment has been really fast (4 working days)....as never seen from Asia.
Ecross, If you'll be in Freidrichshafen this year, you could have the opportunity to try my XD.....
Of course, you are welcome to try the Astro Bike too, Exactly 3 years Ago I've ridden your powerful KMX, Have not forgotten that short ride.... :wink: Since I was pretty new to the electric world.....
Hi Jules, yes I'm in Friedrichshafen this year, and maybe I have some time to test your great bikes. All my Trikes are now with good suspension, I have Steintrike WO-1 and HP Scorpion FS-26 MTB. For the faster setup I use a +10kw setup with self limited 80kmh, all 100% ok. But for really offroad and uphill I`m looking for a slower setup like this 2-gear motor set. Also the 15A to 20A level is good for light batteries. And a 10kg motor in the back is not so easy to handle downhill, but you now this all...
For the new Scorpion I'm looking for a second motor, because fist I will test a big bafang 350-500W but I have interesting to test also the 2-gear motor. I need for my 135mm back a motor with only max. 135 - 145 or 148mm wide. Disc are welcome but not necessary, because Rimbracke also installed. The Alu swing arm is bended little to 145mm no problem.
You have now big experience about to this motors and controller and I have no big motivation to spend much time into the motor sets, so maybe you can offer me a motor set with good rim 1x or better 2x crossed with 26" and later also into 20" rims. When the offer is ok, we can meet us in Friedrichshafen or I can visit you in Italy at your home. I can bring my Trike with me and we can have some fun up and downhill. I can bring my new 10S 12S and 13S Lipos/18650er cells and corepacks with me, also some strong and little charger are on my bench for testing, power range 500 - 2000Watts. What's your thinking?
docnjoj said:So I laced up the wheel (not pro-like but serviceable) and brought it to the LBS and they said "Sure we can true that" BUT the spokes may be too long. 4 spoke calculators agreed but they could be wrong. Yuk! Oh well we shall see. I got 144 mm but they may need 142 or even 140. Luckily John Holmes is a mailbox away or perhaps LBS can cut them shorter and thread them. Maybe I should have had the folks in china lace it up?
otherDoc
Well it is at the bikeshop for truing. I got a brainstorm and thought that if I reverse the spokes so that the head is inside it will shorten them a bit and widen the triangle of spokes at the hub end. I actually started to lace that way but it appeare that the spokes might be too short. no such luck. Yes I am willing to pay twice for spokes. Sometimes that is the way it goes.eMax said:docnjoj said:So I laced up the wheel (not pro-like but serviceable) and brought it to the LBS and they said "Sure we can true that" BUT the spokes may be too long. 4 spoke calculators agreed but they could be wrong. Yuk! Oh well we shall see. I got 144 mm but they may need 142 or even 140. Luckily John Holmes is a mailbox away or perhaps LBS can cut them shorter and thread them. Maybe I should have had the folks in china lace it up?
otherDoc
No China is never that great for wheel building! One I got from BHS Battery was terrible! Best getting the LBS to do it even if it means new spokes. I just got the DHL tracking for mine im pretty excited. Plan on positing heaps of info once I set it up with my 26er MTB. Will tentatively run at 48v.
drsolly said:The LCD does volts, speed, watts and temperature. But I think the temperature is ambient, not the motor. I'm not sure of that yet. Nine wires come out of the motor; three power, five hall, so what's the other one? Temperature, surely?
drsolly said:I couldn't see how you can limit the "full throttle".
d8veh said:i've been running mine at 20A for 500 miles, although at 36v. I soldered about 30% of the shunt in the controller to get it like that.
endlessly_ending said:By the way, a new firmware said to be correcting my problems with manual gear switch at the Lishui sine wave controller already did arrive the day before yesterday.
Will see how I can dump it to the controller this weekend.
docnjoj said:it started off fine but after I fiddled with the KT-LCD3 a bit the automatic shift started hunting between low and high.