My father bought a 250W hub motor for his roadback from http://www.electric-bike-kit.com/24velectricbikehubmotor.aspx.
This is all the info that came on the website.
We are planning on using this with 8s LiPo configuration (30V) and we will monitor the ampdraw to make sure it doesn't burn. Here are my questions:
1. Are there any problems using a Hobbywing platinum 70a HV ESC (that supports up to 12s) that we own if we switch the cables.
2. Where can we find more info about the motor?
3. Whats the actual max Watts we can put into this.
4. How many poles does this motor have.
Thanks guys!
This is all the info that came on the website.
This planetary-geared BLDC PWM 250w 24v brushless hub motor, weighing six pounds comes in a UPS flat rate box with an eight inch cable attached. To operate this motor you will need a pulse width modulation (PWM) controller to convert the basic DC of a battery to a modulated current (the motor cable contains three power wires). Approximately 200 rpm at a 4-amp load.
Tough, rugged, and fully weather proof. Internally greased and fully sealed for years of maintenance free reliable operation. This motor comes with our standard 2-year warranty, but basically you can expect it to outlast your bike or whatever vehicle you are driving with it.
Enjoy!
We are planning on using this with 8s LiPo configuration (30V) and we will monitor the ampdraw to make sure it doesn't burn. Here are my questions:
1. Are there any problems using a Hobbywing platinum 70a HV ESC (that supports up to 12s) that we own if we switch the cables.
2. Where can we find more info about the motor?
3. Whats the actual max Watts we can put into this.
4. How many poles does this motor have.
Thanks guys!