DeathBlade
100 W
- Joined
- Oct 18, 2008
- Messages
- 111
I'm planning a new build now that I got a new frame, diamondback response (needs a new fork though).
I am planning on using a Turnigy 80-100 180kv or 130kv depending on the 'sweet spot' in the power curve for the motor.
The target speed is a max of 35mph, as part of the gearing I have a strumy archer AW hub for use as a multispeed jackshaft, the AW gearing is (1:.33, 1:1, 0.75:1)
Probably going to use timing belts with a top hat adapter for the rear disc.
With a CC HV1?? controller and HK lipos voltage unknown.
So now the question is knowing a 35mph speed, and a 26inch tire, what would be the optimum voltage and gear ratio?
Does anybody have any power data for the 80-100 motors?
I am planning on using a Turnigy 80-100 180kv or 130kv depending on the 'sweet spot' in the power curve for the motor.
The target speed is a max of 35mph, as part of the gearing I have a strumy archer AW hub for use as a multispeed jackshaft, the AW gearing is (1:.33, 1:1, 0.75:1)
Probably going to use timing belts with a top hat adapter for the rear disc.
With a CC HV1?? controller and HK lipos voltage unknown.
So now the question is knowing a 35mph speed, and a 26inch tire, what would be the optimum voltage and gear ratio?
Does anybody have any power data for the 80-100 motors?