markz
100 TW
All this time I have been running without my CA3-DP plugged in to my Lyen 18fet 4110 controller with MXUS 3000W 4504 4T motor, now I want to actually use it since I paid for it and all. I tried playing around with it, I thought I got the poles wrong, but its set right at 23.
When I plug in the CA, and I turn the throttle, the motor turns slowly. Now I have my throttle plugged into the controller. Just now I am messing around on Youtube, and I see buddy setting up his CA for the exact same setup as me. He has his throttle through the CA, I would hazard a guess through one of the Accessories connectors.
Would this acutally cause the motor to spin so slow.
Because when I disconnect the CA, man I fly, I really fly, I go so fast and the throttle is so sensitive I got to baby the throttle.
So when I hook up the CA3-DP, I noticed a bunch of cables coming off the front, in the velcro thingy.
I never really took much time to know what each cable does.
But I guess now I hook everything up to the CA, it goes through the CA, then only one cable to my Lyen 18fet 4110 controller. Then of course theres the 3 phase wires and the hall wires that are hooked up.
I go to ebikes.ca, and I find what these cables are.....
6 pin connector to CA-LDP compatable controller - I assume this is the long cable that goes to my Lyen.
DC Power
Analogger
THUN Sensor
Accessories (4 connectors) - I assume these are the ones I hook up my throttle to, any switches I want, not sure what the other 2 are for. But yes I want a 3 speed switch to tame this motor.
Any help would be appreciated. I checked and my current throttle connector is to big for the CA, not sure what I will do, so I havent been able to hook the throttle up yet, because I am doing the big 8 hour charge on my batteries.
When I plug in the CA, and I turn the throttle, the motor turns slowly. Now I have my throttle plugged into the controller. Just now I am messing around on Youtube, and I see buddy setting up his CA for the exact same setup as me. He has his throttle through the CA, I would hazard a guess through one of the Accessories connectors.
Would this acutally cause the motor to spin so slow.
Because when I disconnect the CA, man I fly, I really fly, I go so fast and the throttle is so sensitive I got to baby the throttle.
So when I hook up the CA3-DP, I noticed a bunch of cables coming off the front, in the velcro thingy.
I never really took much time to know what each cable does.
But I guess now I hook everything up to the CA, it goes through the CA, then only one cable to my Lyen 18fet 4110 controller. Then of course theres the 3 phase wires and the hall wires that are hooked up.
I go to ebikes.ca, and I find what these cables are.....
6 pin connector to CA-LDP compatable controller - I assume this is the long cable that goes to my Lyen.
DC Power
Analogger
THUN Sensor
Accessories (4 connectors) - I assume these are the ones I hook up my throttle to, any switches I want, not sure what the other 2 are for. But yes I want a 3 speed switch to tame this motor.
Any help would be appreciated. I checked and my current throttle connector is to big for the CA, not sure what I will do, so I havent been able to hook the throttle up yet, because I am doing the big 8 hour charge on my batteries.