Configuration and operation of the CA V3 with two batteries

[oldwahoo54]

I just received a new battery from em3ev and I need to configure the CA V3 to be able to switch back and forth from the old to the new. Not quite seeing where that procedure is detailed in the user's guide. Can someone point me in the right direction?

Thanks

 

[oldwahoo54]

OK, I think I figured it out. In the setup utility I changed from 'A' to 'A and B' and then filled in B's parameters in the second column.

Then learned that the right button press has to be followed somewhat quickly by a left button press to keep from going to trip reset.