j bjork
1 MW
To clarify, my results are based on how long I could ride before the windings got over 130 degrees C.
That is where I set my power rollback, and completely cut at 150 degrees C. So a ride often ended with a winding temp about 140 degrees.
With statoraid it was probably double the runtime or something, with just a little higher outside temp on the rotor.
I added hubsinks anyway, but the difference wasnt very noticeable in runtime from what I remember.
I suppose it probably made a difference in outside temp on the rotor, but I dont really remember how much.
That is where I set my power rollback, and completely cut at 150 degrees C. So a ride often ended with a winding temp about 140 degrees.
With statoraid it was probably double the runtime or something, with just a little higher outside temp on the rotor.
I added hubsinks anyway, but the difference wasnt very noticeable in runtime from what I remember.
I suppose it probably made a difference in outside temp on the rotor, but I dont really remember how much.