GGoodrum
1 MW
MitchJi said:Hi Gary,
How do you plan to mount it on the 1-3/8" bearing tube?
I can't find 1/16" wall tubing online. What I did find (at McMasters) is:
Wall Thickness .065"
Inside Diameter 1.37"
Outside Diameter 1-1/2"
I think, if necessary, you can remove the .025 with some emery cloth, on a shaft or stick, while rotating the tubing in a drill.
Actually, I think 2-1/2 thousandths is probably close enough. :wink: There needs to be a slot cut anyway. I should get the stem and the tubing tomorrow, so I'll give it a try.
-- Gary