Jeremy Harris
100 MW
I'd be interested to see if this has any effect, I very much doubt that it will. The series resistor is only 2k2 and looking at the chip cap it can't be more than about 0.1uF. The time constant of this is just way too small to have any noticeable effect at all, my guess is that the soft start is in software.
The odd thing is that my Infineon (a baby 6 FET one) doesn't seem to have any noticeable lag on my bench test set-up. This makes me wonder as to what the software setting may be in yours. Have you tried flashing it with vanilla settings to see whether that makes any difference? I've just spent half an hour playing with different software settings on mine to try and re-create the sluggish start-up you and Luke are seeing, but for some reason I can't seem to make mine do it.
Jeremy
The odd thing is that my Infineon (a baby 6 FET one) doesn't seem to have any noticeable lag on my bench test set-up. This makes me wonder as to what the software setting may be in yours. Have you tried flashing it with vanilla settings to see whether that makes any difference? I've just spent half an hour playing with different software settings on mine to try and re-create the sluggish start-up you and Luke are seeing, but for some reason I can't seem to make mine do it.
Jeremy