fevitz
10 W
Im having a problem with my new build and need some advice to get things right . The motor is a 36v 450w 261rpm / the controller is 24/36/48 compatable as is the LCD display . The battery is a 48v lifepo4 . Ive just taken it for its first test run and it keeps on cutting out . I only went around the block , the throttle cuts out immediately as the motor kicks in and when I release it and apply , it kicks in for a second then cuts out . It continually does this on and off ,,,,its also noisy but I guess that's vibration in the bike itself . I had only travelled 1/2 mile when I returned the controller was very hot and the wheel / motor was warmish !
Could this be a PAS wire I need to disconnect as I have not connected the PAS up . Here are a couple of photos of the wiring from the controller . There were no directions with how to connect this as I bought all parts separately online . The power is coming from the battery to the motor , its just that the motor and controller are getting hot and the power to the motor keeps on cutting out . I can supply a better detailed picture of the controller if needed .
many thanks rick
Could this be a PAS wire I need to disconnect as I have not connected the PAS up . Here are a couple of photos of the wiring from the controller . There were no directions with how to connect this as I bought all parts separately online . The power is coming from the battery to the motor , its just that the motor and controller are getting hot and the power to the motor keeps on cutting out . I can supply a better detailed picture of the controller if needed .
many thanks rick