motomech
10 MW
12 :1 is right between the 201 and the 328 gear ratios. It is the best compromise for probably 90% of single mini-motor installs.neptronix said:The H series are probably sold at a lower RPM due to their insane eRPM because of the 12:1-13:1 reductions they have.
Give 'em volts and find the limits!
I added Volts to the 328. Going from 13S to 14S netted little speed increase. They become power-limited and more current is needed, risking the motor.
This is what MWkeefer ran up against years ago with the MXUS. it was fine on 15S, 16S, even 18S at low current values. But as soon as he upped the current to allow
the potential rpms to be reached-Smoke!